RCB-2 ColorBar Alum Bar for SSR, Bulb & T-Seam (6 Foot)

$99.00 - $172.00
(No reviews yet) Write a Review
SKU:
RCB-2CB-Mill-6FT
Availability:
In Stock
For Panel Type:
Standing Seam Metal Roof With Concealed Fastener
Advantages:
Fits Most Panels Profiles. Swivels up to 11 Degrees in Valleys
Includes:
6' Bar, Mounting Clamps and Installation Hardware
Free Shipping:
Enter Zip Code and Select Free Shipping at Checkout
  • Free Shipping
  • Made in America
  • Fits most panel profiles including Bulb Seam and T Seam Panels
  • Swivels up to 19 Degrees in Converging Hips and Valleys
  • Laboratory and field tested
  • Can be installed year round.
  • Easy installation
  • Available in aluminum and can powder coated or use a 2" color strip.

RCB-2 ColorBar is a snow retention system that features our exclusive extruded aluminum bar with aluminum clamps. The face of the ColorBar features top and bottom channels that can accept optional 2” metal color strips available from the project roofing supplier. RCB-2 ColorBar is mounted with the the patented universal fit RoofClamp RCT. It fits many more standing seam roof panel profiles (see clamp comparison) than our standard stainless steel bar clamp. The mill ColorBar is safely and securely fastened to a standing seam panel with the patented aluminum RCT RoofClamp, using 3 stainless steel cup tipped set screws. The RCB-2 ColorBar features top loading bar brackets for fast installation. RCB-2 ColorBar systems can be designed for most standing seam roof systems. The RCB-2 ColorBar mounting bracket can swivel up to 19 degrees for mounting the snow retention system in converging hips or valleys.

Mill finish 6 foot kits are in stock and ship fast via ground shipping. Large and custom orders are usually shipped in 12 foot lengths and are packed in crates that are shipped via LTL freight.

Safe for Roofs
This continuous rail-style design runs the length of the roof and ensures no risk to damaging roof seams with screws or holes. ColorBar prevents rooftop avalanches that can lead to damaged gutters, HVAC units, cars, patios and even injuries. This product is perfect for standing seam metal roofs with its one piece aluminum clamp featuring 3 non-penetrating cup tipped set screws. This ColorBar rail design is connected with included splice connectors

cb-compare.jpg

Unmatched Strength and Durability
ColorBar features a extruded aluminum bar and offers unbeatable strength and durability. The product also features super strong "cup tipped" stainless steel screws, not slippery "round nose" screws. The strength of this product has been proven in both laboratory and field testing.

Easy to Install
Exclusive top loading clamps and brackets make this the industry's fastest installed system.  Fewer parts mean less labor! 

Includes Custom Design
We will provide a free custom design and quote for your SnoBar system, begin the process by submitting the Quote Request Form or call us at 1-800-SNOJAX-1 (800-766-5291) with any questions.

Important Disclaimer:
This snow retention system is not designed to be installed in isolated areas such as just over doorways, stack pipes, chimneys or partial roof sections. Upper roofs, if any, must not be allowed to shed snow and ice on to lower roof areas where this product is being used. All upper roof areas must have a snow retention system in place before using this product on lower roof areas. Always obtain a manufacturer's quantity and spacing recommendation before purchasing and installing this product. If this system is not used as per the manufacturers recommendation severe roof panel damage, personal injury and/or death may occur.

The following warranty is made in lieu of all other warranties expressed or implied. Recommendations for proper use of the product are based on tests believed to be reliable. Any goods proven to be defective due to materials will be replaced, or purchase price refunded, but in no event shall the manufacturer be responsible for damages in excess of the purchase price. User shall determine the suitability of the product for its intended use and assumes all risks of its use or handling. 1. All loads incurred by the SnoBar will be transferred to the panels. Therefore, proper panel attachment to substrate/structure is necessary to prevent roof panels from sliding under snow load. New and existing structures must be evaluated to insure they can withstand retained snow loads. (In instances where there is an overhang at the eave edge, it is imperative to make sure that the overhang can hold the accumulated loading, otherwise the first row of SnoBar should occur at the bearing wall.) 2. It is not recommended to place the SnoBar System in isolated areas such as doorways, vents and partial roof areas. Please call for special design considerations in those areas. 3. Consider whether your roof system and/or substrates (felts or membranes) run the risk of ice damming with the addition of this type of system. 4. The SnoBar Clamp System requires the roof panel to be a min. of 24 GA. steel and have a seam height of at least 1". Clamp spacing cannot exceed 24"O.C. Clamp spacing varies dependign on seam spacing (12" o.c. up to 42" o.c). Clamps should be placed at every seam, so that the load is distributed evenly to every roof panel. It is not recommended to use a clamp type system when the roof uses a seperate seam cover or batten. 5. The U-Bracket System requires a purlin or structural support beneath it to mount to. 6. No snow retention system is capable of retaining 100% of snow and ice from falling off the roof. 7. Designer/Arhitect, Installer, or Owner of the project should have knowledge of the local snow loads, climatic conditions, roof slope, roof orientation, and roof design prior to installing SnoBar. 8. After considering the above factors, the determine lineal feet of SnoBar required is based on length of panels, roof slope, snow loading and areas needing protection from falling snow. (Call SnoBlox-SnoJax for clamp and bar loading values.) 9. It is the sole responsibility fo the Designer/Architect, Installer, or Owner to assess the suitability of using the SnoBar System based on the above design considerations. SnoBlox-SnoJax or any or its subsidiaries, or Riddell & Company, Inc and Action Manufacturing are under no liability if failure occurs from improper installation, improper set screw torque, improper panel attachment, improper roof system installation, improper use of the SnoBar system or under designed system placement of the SnoBar system. This is a special-order item, thus All Sales are Final. Sorry, no returns accepted.