SnoBar Galvanized Mill Finish (6 Foot)

$58.00 - $95.50
(No reviews yet) Write a Review
SKU:
SB-Mill-6FT
Availability:
Mill Finish In Stock
For Panel Type:
Standing Seam Metal Roof With Concealed Fastener
Includes:
6' Bar, Mounting Clamps and Installation Hardware
  • Price includes 6' Galvanized Bar, stainless steel clamps with set screws, tek screws for attaching the bar to the clamp and 2 End Caps.
  • Optional IceStoppers to keep the snow from sliding under the bar is highly recommend 
  • Made in America
  • Laboratory and field tested
  • Can be installed year round
  • Easy "Drop in Clamp" installation
  • Standard bar is galvanized steel. Please call for prices on stainless steel, and powder coating options.

SnoBar is a snow retention system available in 16 gauge, galvanized mill finish or optional stainless steel (please call for pricing). Both options offer superior corrosion resistance.  SnoBar can also be color matched by powder coating both bar and clamps (please call for pricing). SnoBar systems can be designed for most roof panels with our patented top loading non-penetrating stainless steel clamp attachments. 

Safe for Roofs
This product is perfect for standing seam metal roofs with its one piece, top loading stainless steel clamp. This continuous bar design runs the length of the roof and ensures no risk to damaging roof seams with screws or holes. SnoBar prevents rooftop avalanches that can lead to damaged gutters, HVAC units, cars, patios and even injuries.

Great Strength and Durability
SnoBar features a design that is available in either 16 gauge galvanized steel or stainless steel construction and offers great strength and durability. The product also features super strong "cup tipped" stainless steel screws, not slippery "round nose" screws. The strength of this product has been proven in both laboratory and field testing.

Simple and Fast Installation
Exclusive top loading clamps and brackets make this the industry's fastest installed system.  Fewer parts mean less labor! 

Includes Custom Design
We will provide a free custom design and quote for your SnoBar system, begin the process by submitting the Quote Request Form or call us at 800-766-5291 with any questions.

Important Disclaimer:
This snow retention system is not designed to be installed in isolated areas such as just over doorways, stack pipes, chimneys or partial roof sections. Upper roofs, if any, must not be allowed to shed snow and ice on to lower roof areas where this product is being used. All upper roof areas must have a snow retention system in place before using this product on lower roof areas. Always obtain a manufacturers quantity and spacing recommendation before purchasing and installing this product. If this system is not used as per the manufacturers recommendation severe roof panel damage, personal injury and/or death may occur.

The following warranty is made in lieu of all other warranties expressed or implied. Recommendations for proper use of the product are based on tests believed to be reliable. Any goods proven to be defective due to materials will be replaced, or purchase price refunded, but in no event shall the manufacturer be responsible for damages in excess of the purchase price. User shall determine the suitability of the product for its intended use and assumes all risks of its use or handling. 1. All loads incurred by the SnoBar will be transferred to the panels. Therefore, proper panel attachment to substrate/structure is necessary to prevent roof panels from sliding under snow load. New and existing structures must be evaluated to insure they can withstand retained snow loads. (In instances where there is an overhang at the eave edge, it is imperative to make sure that the overhang can hold the accumulated loading, otherwise the first row of SnoBar should occur at the bearing wall.) 2. It is not recommended to place the SnoBar System in isolated areas such as doorways, vents and partial roof areas. Please call for special design considerations in those areas. 3. Consider whether your roof system and/or substrates (felts or membranes) run the risk of ice damming with the addition of this type of system. 4. The SnoBar Clamp System requires the roof panel to be a min. of 24 GA. steel and have a seam height of at least 1". Clamp spacing cannot exceed 24"O.C. Clamp spacing varies dependign on seam spacing (12" o.c. up to 42" o.c). Clamps should be placed at every seam, so that the load is distributed evenly to every roof panel. It is not recommended to use a clamp type system when the roof uses a seperate seam cover or batten. 5. The U-Bracket System requires a purlin or structural support beneath it to mount to. 6. No snow retention system is capable of retaining 100% of snow and ice from falling off the roof. 7. Designer/Arhitect, Installer, or Owner of the project should have knowledge of the local snow loads, climatic conditions, roof slope, roof orientation, and roof design prior to installing SnoBar. 8. After considering the above factors, the determine lineal feet of SnoBar required is based on length of panels, roof slope, snow loading and areas needing protection from falling snow. (Call SnoBlox-SnoJax for clamp and bar loading values.) 9. It is the sole responsibility fo the Designer/Architect, Installer, or Owner to assess the suitability of using the SnoBar System based on the above design considerations. SnoBlox-SnoJax or any or its subsidiaries, or Riddell & Company, Inc and Action Manufacturing are under no liability if failure occurs from improper installation, improper set screw torque, improper panel attachment, improper roof system installation, improper use of the SnoBar system or under designed system placement of the SnoBar system. This is a special-order item, thus All Sales are Final. Sorry, no returns accepted.