null Skip to main content

Economical 6 Foot SnoBar and ColorBar Snow Rail Kits

See Now

Metal Roof Snow Guards

Sloped glossy coated steel roofing requires snow guards, snow retention systems, or snow rails to control the sudden release of snow and ice during winter. These roofing materials help protect people, prevent injuries and damage to gutters, and end property damage by keeping snowfall on the roofing surface. Snow retention systems are commonly used on roofs in regions with heavy snowfall to improve safety and protect people and property structures from the weight of snow and hazards associated with falling snow and ice. Snow guards are evenly spaced on standing seam roofs to create friction and hold snow and ice in place until they melt or fall off in a controlled manner to prevent potential damage to gutters. The durable design of a specific type of snow guard material depends on factors such as the roof type, the climate of the region, the snow weight, and the building's aesthetics. Powder-coated snow guards and snow rails have increased durability to withstand harsh winter elements that roofs can experience.

What are the recommended heights and widths for snow guards?

An effective pad-style snow guard product should measure at least two and a half inches high and three inches wide. These measurements determine the snow retention system's function, strength, and effectiveness of the holding ability of the snow weight.

What are the factors to consider when choosing snow guards?

When choosing snow retention materials, consider using snow guards made of stainless-steel powder coated in the USA to match the American-made roofing colors. Manufacturers of snow guards do not recommend adhesive installation with their snow retention systems. The roof type plays a role in determining which type of snow guard materials to use. Slate roofs usually use snow guards that hook into the screws under the slate shingle. Most snow guard attachment methods are compatible if you have a screw-down roof. Screw-down snow guards have screws that fasten through the snow guard into a purlin or structural support below to avoid release in winter. Compatible screws must be attached to at least one and a half inches of substrate. If you have a standing seam roof, choose a plastic snow guard that fastens with adhesive or a snow rail that clamps to the seam. Keeping snow from sliding off steep roofs sometimes necessitates more than just putting snow guards over an entranceway or vent pipe. Not all roofs are alike, and the type of snow guards recommended may differ depending on the roof type and roofing materials used in the project.

What is the preferred method of attaching snow guards to avoid damage and leaks?

The preferred snow guard attachment method to prevent damage and avoid leaks in your house or commercial roofing is to install snow retention systems with adhesive. The preferred snow guard adhesive is SureBond SB-190. Only use adhesive with snow guards constructed of UV-stabilized polycarbonate. Any company that manufactures snow guards should be able to provide a customized spacing layout before purchase. Adhesive snow guards should not be installed in the fall because they need adequate time and temperature to cure properly. Clean debris from the roofing panel with rubbing alcohol and let dry before installing an adhesive snow guard.

It's advisable to consult an architect, engineer, or snow guard manufacturer to determine the most durable and effective snow retention solution for your roof type. After purchasing snow guards, following the manufacturer's installation directions and recommended spacing layout is crucial. Ensure that the primary business of the manufacturers supplying the snow guards is snow retention; many plastic injection molders now claim to be snow guard experts. It's best to confidently purchase snow guards proudly made in the USA to guarantee the best quality for your house or commercial project.

Types of Snow Guards

These are individual polycarbonate plastic or metal snow guards affixed to the metal roof's flat panel surface. Typically, independently placed snow stops will be spaced throughout the entire roof to restrict the movement of frozen precipitation. Most pad-style snow guards can be fastened with adhesive to the roof surface or screwed down through the metal roof panel into the structural supports below. Never glue pad-style metal snow guards to a metal roof sheet; only mount pad-style plastic snow guards with adhesive if that attachment method is preferred. It is advisable to space individual mounted snow guards in a staggered formation so that they behave like fingers, gripping the snow and ice and holding it in place until it can safely melt.

The very first polycarbonate snow guard was the Snojax I. This invention replaced the cheap cast snow guards that rusted on metal roofs due to the galvanic reactions of dissimilar metals when exposed to the elements. As standing seam roofs gained popularity, the company introduced the Snojax II with a new, more extensive base for adhesive mounting. Later on, a more cost-effective version, the SnoBlox Deuce, was created to eliminate minor rib straddling by adding a waffle base to improve adhesion when applied with adhesive. The UV-stabilized polycarbonate used to make these snow guards is the same material as on the astronaut's face masks.

The safest way to attach a snow guard to any metal roof is with adhesive. The most significant advantage of this attachment method is that there will be no roof leaks because there are no roof penetrations. Adhesive-mounted snow guards do not damage the roof in the event of a release, making this attachment method the least detrimental to the roof panel. It is not advisable to screw down snow guards on concealed fastener metal roof systems. Standing seam roofs accommodate thermal expansion and contraction, allowing them to adjust to various temperature conditions. Screwing a snow guard into this type of panel will interfere with this natural occurrence. The only recommended adhesive for mounting plastic snow guards is the SureBond SB-190.

Stainless Steel snow guards provide an excellent option for all types of metal roofs. Screw-down pad-style like the SnowCatcher or the bracket-style aluminum SnoCleat PBR snow guards on exposed fastener roofs fasten into a purlin or structural support below the roof sheet. Installers use individual seam-mounted aluminum snow guards, like the SnoCleat RC, on standing seam roofs without penetrating the panels. There is also an option to use galvanized or aluminum snow rails that either screw down or attach to the standing seam.

The recommended attachment method for snow guards depends on the project's roofing type. If the metal roofing panels are screwed down, then it is usually acceptable to mechanically attach the snow guard. It is essential to fasten the screws to a purlin or structural support below. Never stitch the screws just to the metal roof sheet. Individual screw-down snow guards should always be placed in the roof panel's flat portion and staggered across the entire roof. All our pad-style metal and polycarbonate snow guards are suitable for mechanical attachment. The SnoCleat PBR screw-down bracket-mounted snow guards get installed like pad-style snow retention. The SnoCleat 2.67 is a specialty snow guard that mounts on the high portion of the wavy corrugated metal roof panel. As with all our mechanically mounted snow retention systems, the screws attach to a purlin or substructure below.

Standing seam snow guards, typically installed on the seams of metal roof panels on concealed fastener roofs, are also known as snow rails or individual seam-mounted snow guards. The other standing seam snow guard type is a polycarbonate pad-style, applied with adhesive. The IceJax and Snojax II models can be mounted on the flat portion of the roof panel or flipped over to straddle the minor rib. The SnoBlox Deuce fits between most minor ribs with the need to rib straddle.

Snow rails should consist of square or flat metal bars attached to brackets or seam clamps running horizontally across the entire roof. Optional IceStoppers prevent snow and ice from sliding under the bar. Our experience has proved that round bars do not effectively hold snow and ice on a sloped metal roof. All snow bars need to have a flat surface to work correctly. The flat-face design of our bar systems keeps snow and ice in place to prevent it from sliding down the roof. The SnoBar snow retention systems can be color-matched to the metal roof panel. Using a square bar like the SnoBar or a flat bar like the ColorBar is preferable among contractors. Bar-Style snow guards can be mounted on clamps to the standing seams or screwed down to a mechanically fastened panel using a bar mounting bracket. A double-bar SnoBar and Two two-bar ColorBar system is also available.

The novelty of peel-and-stick snow guards is a great concept. However, a tape-mounted snow guard, like our SnoBreaker 3m, must be pointed to break the snow and ice instead of holding it on the roof until it melts. Even though the strength of the 3m tape we recommend is incredible, the perimeter still needs to be sealed with the SB-190. The SB-190 sealant/adhesive keeps the water from getting trapped underneath the guard. Peel-and-stick snow guards are considered a non-permanent application for light-duty use.

Installers mount the bracket-style snow retention system using a screw-down bracket that attaches to the flat portion of a screw-fastened metal roof. The SnoCleat PBR and SnoCleat 2.67 use aluminum brackets to mount to a screw-down roof system. These metal brackets also support mechanically fastened continuous bar-style snow retention systems. When properly spaced on the roof, mechanically attached snow rails and individual snow cleats will help mitigate the damage caused by sliding snow and ice while distributing the weight evenly across the roof. The SnoBar and ColorBar brackets are available to fit most screwed-down metal roof panels. Many architects prefer the look of the SnoBar and structural ColorBar snow retention system because they are discreet without disrupting the roof's aesthetics.

The stainless steel Decorative SnowCatcher snow guards come in several different shapes. They are attached with quarter-inch thick screws through the roof sheet into a purlin or structural support below. The base is 1.5 inches wide, so it fits most panels without straddling the minor ribs. This product is more conducive for screw-down roofs than standing seam roof applications. The most popular shapes are the Kodiak, Maple Leaf, Mustang, Fleur-de-lis, and Sunburst. Special order powder coating is available for the snow guards to match the color of the roof.

SnoBlox-Snojax offers a range of snow guards that can be color-matched for metal roofs. The snow retention systems are available in a variety of options. Our polycarbonate SnoBlox Deuce snow guards come in several hues, featuring color throughout rather than just an outer coating. Our metal snow guards can be powder-coated to match various roof colors, including our SnowCatcher's multiple available shapes, including the Standard Rectangle, Fleur-De-Lis, Maple Leaf, Mustang, Sunburst, and newly introduced Kodiak. All of our SnoCleat models can be powder-coated as well. For customers desiring a more heavy-duty snow bar or snow rail system, you can have our galvanized SnoBar or aluminum ColorBar systems fully powder-coated. When coated, this full coverage option allows our snow retention systems to blend seamlessly with the aesthetics of your roof. Additionally, the aluminum ColorBar has the added benefit of accepting a slide-in custom color strip. However, it is essential to note that color-matched guards may cast shadows and fade differently over time compared to the roof material. Our customers can order our metal snow guard products in a mill finish and then paint or powder-coat them locally if desired.

The SnoBlox Slate and shingle roof snow guard, designed for places with greater snow loads, allows quick installation and is appropriate for existing or new construction applications. The slotted strap is 16-gauge 304 stainless steel and utilizes the SnoBlox Deuce in clear or standard colors. It has reduced the need to remove slate, reducing the fracture risk. Insert the slotted bar under the slate or shingle, engage a nail in one of the strategically located slots, and pull down to firmly attach the bar. If installing before a new roof is put down, screw down the strap before nailing down the roofing shingles.

SnoBar/ColorBar products may be safely placed on Membrane/TPO-type roof systems without causing roof leaks, membrane damage, or voiding warranties because of our proprietary Membrane Snow Bar Mounts. A 12-gauge 304 stainless steel plate, two 304 stainless steel studs, and one extruded aluminum ColorBracket mount are used to make membrane mounts. Mechanical connection to new or existing roof structures is made possible by six pre-drilled screw holes. They are intended to be mechanically secured over the base membrane layer and then flashed over with a 12"x 12" square of membrane to create a watertight seal. Please call for pricing.

Despite what some "informative blogs" may indicate, there is no such thing as a "rubber snow guard." There are, however, metal and polycarbonate snow guards and snow rail systems designed for use on EPDM rubber and TPO membrane roofing. The flexible properties of rubber would defeat the purpose of snow retention by easily bending or folding under the weight of snow and ice, rendering them useless. This fact alone is why no such thing exists. Mentions of "rubber snow guards" seem to originate from blogs and "informational" posts created with artificial writing software that often confuses industry keywords and terminology relating to snow guards for rubber roofs, incorrectly changing this to rubber snow guards.

Metal Roof Snow Guard Frequently Asked Questions (FAQs)

If you have a building or home with a pitched metal roof, made of steel, copper, or aluminum, and you live in an area that experiences winter weather, it's wise to consider adding snow guards or snow rails. Without them, you could encounter problems during the winter months, such as sudden slides of snow that might put people, pets, or property in danger. To prevent these risks and manage the hazards of snow accumulation, it's important to use the right snow guard solutions and seek expert advice.

Across most regions in the United States, building codes typically do not mandate the installation of snow guards. However, there are certain areas, especially those that experience significant snowfall or have particular roof characteristics, where specific rules or suggestions regarding snow guards may exist. The main purpose of snow guards is to enhance safety and protect property by stopping large amounts of snow and ice from sliding off roofs and potentially causing harm or damage below. Although building codes generally specify how builders should construct roofs to support the weight of accumulated snow, they seldom require builders to install snow guards themselves. Standards such as the International Building Code mainly address the roof's ability to bear snow loads rather than preventing snow from sliding. It is important to review the local building codes in your area to determine if snow retention measures are necessary for your project.

Regarding mounting, we recommend using adhesive for our polycarbonate snow guards. This method is effective and reliable, as the glue etches itself into the plastic, ensuring maximum holding strength.

All plastic snow guards are not created equal. We pride ourselves on using only the highest quality, 100 percent virgin, UV-stabilized polycarbonate manufactured in the USA. While our polycarbonate snow guards may lose clarity over time, they rarely yellow, ensuring their durability and longevity.

Our test results show that metal and polycarbonate have similar test results. Please see our test results page in the resources tab. Many times, the decision is more aesthetic than strength-based for our customers. Installers can adhesively mount only polycarbonate snow guards on standing seam roofs.

Only the SnowBreaker can be used with 3M double-sided tape. Because of its shape, it breaks up the snow and ice rather than holding it in place. Double-sided tape is never a recommended attachment method for snow guards whose intended purpose is to retain snow and ice on the roof surface. We consider 3M tape a temporary solution only for use with the SnowBreaker when weather conditions are unfavorable for the adhesive curing time.

Bar systems are a robust solution for any roofing project. They are the only recommended solution in locations where the ground snow load is more than 45psf. An adequately designed snow retention system will typically consist of multiple rows up the roof's slope, regardless of type. A snow rail system may require fewer rows but sometimes costs more than pad-style snow guards.

!