RoofClamp RC Panel Compatibility
The RoofClamp RC's Key Features:
-
Made in America
-
Fast, effortless installation.
-
Secure satellite dishes, roof walks, conduits, or HVAC lines.
-
Doesn’t pierce or penetrate the panel. Won’t void the manufacturer's warranty.
-
Only requires 90-inch pounds of torque, almost half of what some other clamps require.
-
Preinstalled screws save time and money.
RoofClamp RC Can Attach Almost Anything To Your Standing Seam Roof
Attach almost any accessory or product to your roof without damaging standing seams or piercing panels with SnoBlox RoofClamps. This patented design fits over roof seams for a fast, effortless installation and will fit almost any seam. Ensure you won't void manufacturer warranties by piercing or penetrating panels on your roof with SnoBlox RoofClamps.
RoofClamp RC is Reusable Over and Over
Unlike competing products, SnoBlox RoofClamps use a coarse-threaded set screw. This type of threading prevents set screw lockup, which means you can reuse the product. Most other products on the market need to be cut off with a grinder, but our clamp allows you to unscrew and reuse the clamp.
RoofClamp RC Has Been Sheer and Tensile Tested
The aluminum RoofClamp utilizes three stainless steel cup-tipped screws. The attachment of the clamp is in one piece instead of two and for extra strength, it has three set screws instead of just one or two. It is fast and easy to install and will last the life of the roof. These two competitively priced models work on most of the same panels as the nine different clamps that are currently on the market. Three 1-1/4” x 3/8” cupped-tipped set screws and One 3/8” threaded mounting hole on top. The RoofClamp RC and RCT mounting clamps have been shear-tested and tensile-tested by a nationally known testing lab.
RoofClamp RC is Safe for Roofs
This patented design fits over the seam. The clamp is one piece and does not require seam feeding up the panel. The RC model is designed to fit most seams up to 1" wide. Interior dimensions are 1" wide by 1" high. The aluminum Roof Clamp utilizes a stainless steel cupped-tipped screw that does not pierce or penetrate the panel; therefore, it will not void the manufacturer's warranty.
RoofClamp RC Submittal Documents
-
RC ROOF CLAMPS
I have tried numerous clamps on the market and found that the RC clamp sets straight when installed, and I like the idea of 3 contact points with no damage to my roof. Don't have to hit these on very easy installation. Well built and with stainless hardware. NOT A CON BUT A DESIGN CHANGE. The only thing I wish that was different is that the bolt on the top had a bonding serration on the bottom of the head instead of a washer with a wider base. Will defiantly buy again. Thank You Rudy
About RoofClamp
In 2010, SnoBlox-Snojax started selling the patented Universal RoofClamp™, a standing seam clamp for accessory attachment on metal roofing. Paul Riddell of Action Manufacturing LLC, the son of Dick Riddell, one of the inventors of the first standing seam roof clamp patented in 1993, invented it. This revolutionary universal fit roof clamp product attaches almost anything to a standing seam roof. Installers can secure satellite dishes, roof walkways, conduits, or HVAC lines with the clamp. RoofClamp can also be used to attach signs or awnings. The RCT model fits over 95 percent of the standing seam panels on the market, so there is no need to stock the many sizes of clamps that many other manufacturers require. The aluminum RoofClamp™ utilizes three stainless-steel cup-tipped screws that do not pierce or penetrate the panel; therefore, it will not damage the panel or void the panel manufacturer's warranty.
