RoofClamp RCT Key Features
-
Made in America
-
Fast, effortless installation.
-
The universal design fits over 90 percent of the standing seam panels on the market.
-
Secure satellite dishes, roof walks, conduits, or HVAC lines.
-
Doesn’t pierce or penetrate the panel. Won’t void the manufacturer's warranty.
-
It fits most bulb and T-seam metal roof panel configurations.
-
Only requires 90-inch pounds of torque, almost half of what some other clamps require
-
Preinstalled screws save time and money.
Attach almost any accessory or product to your roof without damaging standing seams or piercing panels with SnoBlox RoofClamps.
This patented design fits over roof seams for a fast, effortless installation and will fit almost any seam. Ensure you won't void manufacturer warranties by piercing or penetrating panels on your roof with SnoBlox RoofClamps.
RoofClamp RCT is Reusable
Unlike competing products, SnoBlox RoofClamps use a coarse-threaded set screw. This type of threading prevents set screw lockup, which means you can reuse the product. Most other products on the market need to be cut off with a grinder, but our clamp allows you to unscrew and reuse the clamp.
RoofClamp RCT is Strong
The aluminum RoofClamp utilizes three stainless steel cup-tipped screws. The attachment of the clamp is in one piece instead of two and for extra strength, it has three set screws instead of just one or two. It is fast and easy to install and will last the life of the roof. These two competitively priced models work on most of the same panels as the nine different clamps that are currently on the market. Three 1-1/4” x 3/8” cupped-tipped set screws and One 3/8” threaded mounting hole on top. The RoofClamp RC and RCT mounting clamps have been shear-tested and tensile-tested by a nationally known testing lab.
RoofClamp RCT is Safe for Roofs
This patented design fits over the seam. The clamp is one piece and does not require seam feeding up the panel. The RCT model is designed to fit most seams up to 1.1" wide. The interior dimensions are 1" wide by 1 3/8" high, with a half-inch-high seam channel that measures 1.5" across. This clamp is compatible with most T-seam and bulb-seam metal panels. The aluminum RoofClamp utilizes three stainless steel cupped-tipped screws that do not pierce or penetrate the panel; therefore, it will not void the manufacturer's warranty.
RoofClamp RCT Submittal Documents
About RoofClamp
In 2010, SnoBlox-Snojax started selling the patented Universal RoofClamp™, a standing seam clamp for accessory attachment on metal roofing. Paul Riddell of Action Manufacturing LLC, the son of Dick Riddell, one of the inventors of the first standing seam roof clamp patented in 1993, invented it. This revolutionary universal fit roof clamp product attaches almost anything to a standing seam roof. Installers can secure satellite dishes, roof walkways, conduits, or HVAC lines with the clamp. RoofClamp can also be used to attach signs or awnings. The RCT model fits over 95 percent of the standing seam panels on the market, so there is no need to stock the many sizes of clamps that many other manufacturers require. The aluminum RoofClamp™ utilizes three stainless-steel cup-tipped screws that do not pierce or penetrate the panel; therefore, it will not damage the panel or void the panel manufacturer's warranty.