Short Aluminum SnoBar-ColorBar Mounting Bracket for R-Panel

SnoBar-ColorBar

$7.00
(No reviews yet) Write a Review
SKU:
CLR-BRKT-SHORT
Availability:
In Stock
Compatibility:
R-Panels with High Rib That Measure Less Than One Inch
Product Specific:
SnoBar and ColorBar
Processing Time:
Same or Next Day (Mon-Fri)
Adding to cart… The item has been added

Short Screw Down Bar Mounting Bracket with SnoBar Screw Down Short Mounting Bracket with ColorBar

This mounting bracket, also known as the "Short ColorBracket", is a mechanically fastened attachment point for mounting the SnoBar and ColorBar snow rails.

This short bracket is only used on screw-down R-panels where the high ribs do not exceed one inch in height. The advantage of the "Short ColorBracket" is that it is priced lower and has a stealthy profile to make it less noticeable on a metal roof. The face of the bracket has a slot so it can accept a cut piece of leftover roofing stock. The ColorBar rail, sold separately, also has a channel that can accept a leftover piece of the panel to help the system blend in with the roof. The "Short ColorBracket" includes a stick-on foam sealer pad that is placed under the bracket for a weather-tight seal. It does NOT include a bar, mounting screws, or bar mounting fasteners.

Short SnoBar/ColorBar Screw Down Mounting Bracket Side View Short SnoBar/ColorBar Screw Down Mounting Bracket Views

Short ColorBracket Disclaimer:

The SnoBar and ColorBar components are usually sold as a complete component kit or as a project-designed system specified by the manufacturer or architectural engineer. It is important to follow a specifically designed spacing recommendation for your project from the manufacturer or architectural engineer. The components are not sold with the intent of building your own rail system, please see the warranty below.

Short ColorBracket Warranty:

The following warranty is made in lieu of all other warranties expressed or implied. Recommendations for proper use of the product are based on tests believed to be reliable. Any goods proven to be defective due to materials will be replaced, or the purchase price refunded, but in no event shall the manufacturer be responsible for damages in excess of the purchase price. The user shall determine the suitability of the product for its intended use and assumes all risks of its use or handling.

Short ColorBracket Submittal Documents:

The following warranty is made in lieu of all other warranties expressed or implied. Recommendations for proper use of the product are based on tests believed to be reliable. Any goods proven to be defective due to materials will be replaced, or purchase price refunded, but in no event shall the manufacturer be responsible for damages in excess of the purchase price. User shall determine the suitability of the product for its intended use and assumes all risks of its use or handling.

About SnoBar-ColorBar

Don Drew and Dick Riddell invented SnoBar in 1992, making it the original standing seam-mounted snow rail. It was unique enough to earn a patent in 1993. Jim Huff installed the initial version, named Sno Horse, at the Denver International Airport in 1992. Jim Huff devised a way to make an aluminum bar with a channel to slide a piece of metal into the face plate based on a concept from name plates commonly found on office desks. The Sno Horse product later became known as the ColorBar, which features quick installation with a patented drop-in clamp to attach the bar. Roof clamps to attach the bar are available in stainless steel or aluminum. Standing seam metal roofs have utilized the SnoBar system longer than any other snow rail product. There is a SnoBar and ColorBar snow retention system for every sloped roof prone to snow slides. Both snow rails can be powder-coated to match your metal roof.