SnoBar Price List

6' SnoBar/ColorBar Kits are Available Online.

12' Seam Mounted SnoBar/ColorBar

Prices are per Linear Foot in 12' increments. Stainless bars are 10' long.

Standard Screw Down Mounting Brackets for screw-down bar applications are comparably priced.

SINGLE BAR SEAM SPACING ON CENTER	Mill Finish Galvanized SnoBar	Powder Coated Galvanized SnoBar	Mill Finish Aluminum ColorBar	Powder Coated Aluminum ColorBar	Mill Finish Stainless Steel SnoBar	Powder Coated Stainless Steel SnoBar

12" to 15" Centers	$21.50	$24.25	$22.50	$25.25	Call	Call
16" to 17" Centers	$20.00	$22.25	$21.00	$23.25	Call	Call
18" to 19" Centers	$19.50	$21.75	$20.50	$22.75	Call	Call
20" to 23" Centers	$19.00	$21.25	$20.00	$22.25	Call	Call
24" Centers	$18.50	$20.75	$19.50	$21.75	Call	Call
42" Centers	N/A	N/A	$18.00	$20.25	N/A	N/A
Powder Set Up Charge	None	$100.00 (per color)	None	$100 (per color)	None	$100 (per color)
Minimum Order	None	8 bars 96 LF	None	8 bars 96 LF	None	10 bars 100 LF
Lead Time	1-2 Weeks	3-4 Weeks	1-2 Weeks	3-4 Weeks	Call	Call
Same Day Pick Up	YES	No	YES	No	No	No

Small Order Charge	$100 Small Order Charge Applies to Powder Coated Systems if Minimum is Not Met. (This charge is in addition to any powder coat set-up charges.)
System Finish	Mill (Galvanized finished)	UV Stabilized Powder Coat	Mill (Bare Aluminum)	UV Stabilized Powder Coat	Mill (Bare Stainless)	UV Stabilized Powder Coat
ColorStrips: Use metal from your project or purchase 10' strips for $14.80 ea. Mill Finish: Slight variations in the finish are not cause for rejection. Galvanized and Aluminum bars are 12' long, Stainless Finish: Slight variations in the finish are not cause for rejection. Powder Coated Systems: Color variations are not cause for rejection. Lead Times: Please allow up to 7 working days transit time after shipping.
System Components are Included in Above Linear Foot Price:
-S.S. Set Screws -Plastic End Caps (for SnoBar systems) -Aluminum Splice Plates (for ColorBar system)			-Mill Finished S.S. 12 GA. Clamps -Plated Tek Screws -3/16" -Allen Bits
-Above prices are for powder coating are for standard colors. Specialty colors may be subject to a surcharge.

IceStoppers prevent snow and ice from sliding under the bars. For panel widths 16" or less use one (1) IceStopper per panel. For 18" to 24" use two (2) IceStoppers per panel and for panels greater than 24" use Three (3) Ice Stoppers per panel.

IceStoppers w/tek screws	$4.95 /EA (Mill Finished Aluminum)		$6.75 /EA ( Powder Coated Aluminum)

SnoBar and ColorBar Sample Kits are available online Here.
SnoBar and ColorBar is calculated in linear feet up to the nearest 12 foot (Stainless bars are calculated up to the nearest 10').
All sales must match the manufacturer's quantity recommendation to receive the Lifetime Warranty.
Prices Do Not Include Freight, Handling or Taxes.

12' Seam Mount 2 Bar SnoBar/ColorBar

Prices are per Linear Foot in 12' increments. Stainless bars are 10' long.

TWO BAR SYSTEM SEAM SPACING ON CENTER	Mill Finish Galvanized SnoBar	Powder Coated Galvanized SnoBar	Mill Finish Aluminum ColorBar	Powder Coated Aluminum ColorBar	Mill Finish Stainless Steel SnoBar*	Powder Coated Stainless Steel SnoBar*

12" to 15" Centers	$35.50	$37.75	$38.50	$40.75	Call	Call
16" to 17" Centers	$35.00	$37.25	$38.00	$40.25	Call	Call
18" to 19" Centers	$34.50	$36.75	$37.50	$39.75	Call	Call
20" to 23" Centers	$34.00	$36.25	$37.00	$39.25	Call	Call
24" Centers	$33.50	$35.75	$36.50	$38.75	Call	Call
42" Centers	N/A	N/A	$36.00	$38.25	N/A	N/A
Powder Set Up Charge	None	$100.00 (per color)	None	$100 (per color)	None	$100 (per color)
Minimum Order	None	8 bars 96 LF	None	8 bars 96 LF	None	10 bars 100 LF
Lead Time	1-2 Weeks	3-4 Weeks	1-2 Weeks	3-4 Weeks	Call	Call
Same Day Pick Up	YES	No	YES	No	No	No

ColorStrips: Use metal from your project or purchase 10' strips for $14.80 ea. Mill Finish: Slight variations in the finish are not cause for rejection. Galvanized and Aluminum bars are 12' long. Stainless Finish: Slight variations in the finish are not cause for rejection. Powder Coated Systems: Color variations are not cause for rejection. Lead Times: Please allow up to 7 working days transit time after shipping.
System Components are Included in Above Linear Foot Price:
-S.S. Set Screws -Plastic End Caps (for SnoBar systems) -Aluminum Splice Plates (for ColorBar system)			-Mill Finished S.S. 12 GA. Clamps -Plated Tek Screws -3/16" -Allen Bits
-Above prices are for powder coating are for standard colors. Specialty colors may be subject to a surcharge.

IceStoppers prevent snow and ice from sliding under the bars. For panel widths 16" or less use one (1) IceStopper per panel. For 18" to 24" use two (2) IceStoppers per panel and for panels greater than 24" use Three (3) Ice Stoppers per panel. Two Bar Icestoppers require next size up.

IceStoppers w/tek screws	$4.95 /EA (Mill Finished Aluminum)		$6.75 /EA ( Powder Coated Aluminum)

SnoBar and ColorBar Sample Kits are available online Here.
SnoBar and ColorBar is calculated in linear feet up to the nearest 12 foot (Stainless bars are calculated up to the nearest 10').
All sales must match the manufacturer's quantity recommendation to receive the Lifetime Warranty.
Prices Do Not Include Freight, Handling or Taxes. (Page Updated on 8/02/2023)

The structural ColorBar snow rail system is equipped with a 6061-T6 extruded aluminum bar that is capable of accommodating a color strip. This bar is designed to provide superior strength and can span panels wider than 24" in width. The SnoBar system is constructed from a 1" x 1" square hollow tube of galvanized Gator Shield coated steel. Both ColorBar and SnoBar systems are available for purchase online in mill finish or for special order in powder coated finish by telephone.

A well-constructed snow rail system will often have several rows up the roof slope to distribute weight evenly. Changes in panel types, seam spacing, roof slopes, snow loads, and attachment methods can all have significant effects on how a project is laid out. Please fill out the SnoBar Quote Request Form to receive further information, or consult our spacing guideline pages.

Black plastic endcaps are used in the SnoBar system to seal the ends of the bars. The caps have a service temperature of 150° F (66° C) and are constructed of low-density polyethylene. The bar has a clean appearance thanks to these end caps, which also keep mice, bugs, and other pests out. For customer-painted or powder-coated systems that require field cuts, these caps assist in concealing the exposed cut edges.

SnoBar and ColorBar snow rail systems can be installed on almost any type of sloped roofing. Mounting options are available online and over the phone for a range of roofing styles, including Standing Seam Metal Roofs, Screw Down Steel Roofing, PBR, Wavy Corrugated Metal Panels, Asphalt Shingle, Membrane, TPO, and Slate roofs.

No. Pre-drilling is not required with any of our bar systems. Mechanically fastened SnoBar and ColorBar brackets for the snow rails are pre-drilled and come with self-tapping screws to attach to either metal purlins (1.5" Master Drillers) or wood purlins (2" Master Grippers). The back of the colorbrackets, stainless steel standing seam clamps, and aluminum IceStoppers in our various systems are fastened to the bars with self-tapping tek screws. These same tek screws are also used on the ColorBar to install splice connectors between the bars to create a continuous run.