null Skip to main content
"New" Money Saving Snow Guard Bundles
See Now
Standing Seam VentSaver Mounting Plate Contents
(No reviews yet) Write a Review
VentSaver
SKU: SSVS-12-24-KIT-NO

Model 12-24 Standing Seam Ventsaver Mount Plate

$209.00
Availability:
In Stock
For Panel Type:
Most Standing Seam Metal Roofs Including Bulb and T Seams
Mounting Kit Only:
Ventsaver Can be Added as an Option Below
Processing Time:
Same or Next Day (Mon-Fri)
Adding to cart… The item has been added

All VentSaver models can now be mounted on most standing seam metal roof systems without penetrating the floating roof panels.

The Model 12-24 is recommended for panels 16” to 24” wide. The Model 12-24 SS Ventsaver kit can be used with the VentSaver EZ, HD, and the larger VentSaver Extreme with the included wing kit with the optional VentSaver HDC Extension Bracket. The SS Ventsaver features an Adjustable Aluminum Plate that has horizontal channels that allows for various seam spacing up to 24 inches wide. 

HD VentSaver Mounted On 12-24 Standing Seam Plate HD VentSaver With HDC Height Extender On 12-24 Standing Seam Plate

This kit is simple to install with basic hand tools, made in the USA, and constructed of durable, non-corrosive components.

Standing Seam VentSaver Plate Kit Components

The SS Ventsaver Kit includes:

  • 12" X 27" SS VentSaver Adjustable Aluminum Plate

  • Custom-fit Ice Ramp with Edging Strip (Ramp may need to be notched out to fit certain applications)

  • 4 RCT clamps, 12 set screws, 4 top bolts/washers

  • 12 Tek screws.

  • VentSaver is not included but can be selected as an option.

The universal fit RCT clamps are compatible with over 500 standing seam profiles, including t-seams, bulb seams, SnapLok, single lok, double lok, MR-24, etc. Visit our Panel Matrix link here to see if your metal roof seams are compatible. 

The SS Ventsaver Kit Submittal Documents

The following warranty is made in lieu of all other warranties expressed or implied. Recommendations for proper use of the product are based on tests believed to be reliable. Any goods proven to be defective due to materials will be replaced, or purchase price refunded, but in no event shall the manufacturer be responsible for damages in excess of the purchase price. User shall determine the suitability of the product for its intended use and assumes all risks of its use or handling.
Standing Seam Metal Roof VentSaver Mounting Kit

The SS Ventsaver Kit Frequently Asked Questions (FAQs)

The Standing Seam VentSaver Plate Kit is compatible with all three VentSaver models, including the VentSaver EZ, HD, and Extreme. To ensure correct installation, read the instructions for your specific VentSaver model before attaching it to the plate.

Suppose the RoofClamp RCT with this system is installed correctly and torqued to an appropriate setting. In that case, it will not penetrate your seams. The RoofClamp RCT comes with stainless steel set screws that have a cupped tip. These screws form a posi-lock attachment that secures the clamp firmly in place. Furthermore, our cupped tip set screws only require 90 in-lbs of torque—not foot-pounds—as opposed to up to 150 in-lbs for some competitors' screws.

No!! Utilizing the Standing Seam VentSaver Plate Kit as a step or tie-off point for fall prevention is NEVER appropriate. If you're searching for a quick and dependable fall protection solution, we suggest checking into the RidgePro.

Reattaching and retightening the RoofClamp RCT is simple thanks to its coarse threaded set screws made of stainless steel that resist seizing. The round-tipped or finely threaded bullet nose screws included in some rival clamps can bind in the clamps and render them unserviceable.

No. Corrosion is not a concern with this kit. The Standing Seam VentSaver Plate Kit's plate, ramp, and clamp bodies are all aluminum. The set screws, top bolts, and washers in each clamp are all stainless, and the tek screws feature a corrosion-resistant coating. We use the same high-quality materials to construct our three VentSaver models.

The included ramp can be easily field-cut to fit your roof panel configuration. A hack saw, chop saw, or grinder will make quick work of this task, allowing our customers to custom-fit the plate to their specific needs.

About VentSaver

In 2002, Rick Long revolutionized the industry with the patented VentSaver FB-151 and VentSaver P-383 stack and stove pipe snow guards. These products became essential as customers often misapplied snow guards in isolated areas that are prone to failure. VentSaver snow diverters effectively maintain vent stack pipes and chimneys on the roof. They have a fin and cable for support, so they divert snow and ice away from the pipes. In 2010, the VentSaver HD, designed for heavy snow regions, was released and gained rapid popularity. The SS VentSaver kit introduced non-penetrating attachment to standing seam metal roofs. VentSaver EZ replaced older FB-151 and P-383 models in 2020. In 2023, VentSaver Extreme arrived to address issues with taller, wider stove pipes, ensuring enhanced protection.

!