This mounting bracket, also know as the "2.67 ColorBracket", is a mechanically fastened attachment point for mounting the SnoBar and ColorBar snow rails. This bracket is used on 2.67 screw-down wavy corrugated metal roof panels. The "2.67 ColorBracket" includes a stick-on foam sealer pad that is placed under the bracket for a weather-tight seal. It does NOT include bar, mounting screws or bar mounting fasteners. When used with bar, the 2.67 brackets must be place no further apart than 12 inches. Brackets spaced further than 12 inches apart may not be adequate to hold a heavy snow load. The recommended screw for fastening the bracket should be at least 3" long and is not included with bracket.
The SnoBar and ColorBar components are usually sold as a complete component kit or as a project designed system specified by the manufacturer or architectural engineer. It is important to follow a specifically designed spacing recommendation for your project from the manufacturer or architectural engineer. The components are not sold with the intent of building your own rail system, please see warranty below.
The following warranty is made in lieu of all other warranties expressed or implied. Recommendations for proper use of the product are based on tests believed to be reliable. Any goods proven to be defective due to materials will be replaced, or purchase price refunded, but in no event shall the manufacturer be responsible for damages in excess of the purchase price. User shall determine the suitability of the product for its intended use and assumes all risks of its use or handling.