3 Inch SFS Wood Purlin Snow Guard Screw (50 Pack)

$12.50
(No reviews yet) Write a Review
SKU:
SCR-3-CLR-BRKT
Availability:
In Stock
Product Use:
For Screwing Down 2.67 Bracket
Quanity:
50 Screws Per Pack

 The SFS #14 Type 17 A-Milled Point is a 1/4-14 x 3" snow guard screw. These precision carbon steel self tapping fasteners are designed for metal roofs on wood purlins or decking. Features a 5/16" AF Hex Washer Head. To with stand all the elements, this screw comes with a corrosive resistant VistaCoat® premium coating system. and a bond-seal weather proof washer. When screwing down snow guards, the use of Novaflex MR-150 is recommended, unless a foam gasket is used on the base.

This screw is recommended with the SnoBar2.67 and ColorBar 2.67 screw-down mounting bracket. It can also be used on snow guards when a longer length of screw is required to correctly fasten to the wood purlins. There should be at least one inch of screw embedded in the wood.

This screw is not recommended for installation into less than 1" of wood. Fasteners installed in less than 1" of solid wood may have an increased potential for sealing or connection failure over time. This may be due to the fasteners being stripped out during installation and/or due to the lack of adequate wood fiber material to hold the fastener in place during thermal movement cycles or other forces which may be exerted upon the connection

 Spec Sheet

 

The following warranty is made in lieu of all other warranties expressed or implied. Recommendations for proper use of the product are based on tests believed to be reliable. Any goods proven to be defective due to materials will be replaced, or purchase price refunded, but in no event shall the manufacturer be responsible for damages in excess of the purchase price. User shall determine the suitability of the product for its intended use and assumes all risks of its use or handling.