null Skip to main content
"New" Money Saving Snow Guard Bundles
See Now
Stainless Steel Snow Catcher 25 Piece Bundle
(No reviews yet) Write a Review
SnoBlox-Snojax
SKU: SSSC-MILL-Bundle

Stainless Steel SnowCatcher Snow Guards 25 Piece Bundle

Was: $138.75
Now: $132.95
Availability:
In Stock
For Panel Type:
Mechanically Fastened R-Panel 9" to 12" Flats
Processing Time:
Same or Next Day (Mon-Fri)
Offering Contents:
25 SnowCatchers, 50 Heavy Duty Screws & 25 Foam Pads
Adding to cart… The item has been added

Stainless Steel SnowCatcher Snow Guard Bundles

  • Made in America, with American Stainless Steel

  • A flat, forward-facing design is proven to cause less roof stress, failures, and leaks than other competing options.

  • Come with 25 foam base pads; no silicone or messy sealants are necessary.

  • Easy installation

 SnowCatcher DimensionsSnowCatcher With Foam Pad

The Stainless Steel SnowCatcher Snow Guard Advantage:

The large forward-mounted 4" wide face provides a generous holding field, and the 1.5" wide base fits most 36" panels with 9" flats. We include a 1/16" thick adhesive-backed V742 CCF PVC foam sealer base pad. The SnowCatcher requires two screws per guard. The third screw hole serves as a holding point for powder coating, which we do not offer in the bundled packages. This bundle comes with enough screws to install the SnowCatcher using all three holes.

SnowCatcher Snow Guards Testing:

Professional third-party Intertek/ATI tests demonstrate the SnowCatcher held 3923 pounds when attached with #14 screws. The durable construction does not get brittle like cheap guards made from metal castings.

SnowCatcher Snow Guards Application:

The Snow Catcher is for screw-down applications only, and we do not recommend adhesive mounting of this guard. We do not recommend using snow guards in isolated roof areas such as chimneys, doorways, vents, and partial roof sections. Roofing Manufacturers recommend using screws to mount snow guards in the panel flats over horizontal structural supports. The proper way to mount screw-down snow guards is to screw through the two pre-drilled screw holes just behind the face of the guard, through the roof sheet, and attach the screw to the horizontal purlins below. Never stitch a snow guard just to the roofing panel. You can use three screws per guard if you mount it to adequate decking underneath, but we only require using two screws right behind the face of the guard. There are 75 heavy-duty #14 metal roofing screws (2 per guard) included per bundle with a choice of 3 screw lengths.

Contents of the SnowCatcher Snow Guard Bundle:

  • 25 Stainless Steel SnowCatcher Snow Guards

  • 25 adhesive-backed V742 CCF 1/16" thick PVC foam sealer base pads

  • 75 Heavy Duty #14 Metal Roofing Screws with Neoprene Sealing Washers. (3 choices of lengths)

Please refer to the spacing guideline page for proper snow guard placement.

Stainless Steel SnowCatcher Snow Guards Submittal Documents

The following warranty is made in lieu of all other warranties expressed or implied. Recommendations for proper use of the product are based on tests believed to be reliable. Any goods proven to be defective due to materials will be replaced, or purchase price refunded, but in no event shall the manufacturer be responsible for damages in excess of the purchase price. User shall determine the suitability of the product for its intended use and assumes all risks of its use or handling.

About SnoBlox-Snojax

In the late 1970s, we embarked on a quest for an improved snow guard solution that would be non-corrosive and nearly invisible to preserve the building's aesthetic appeal. After extensive testing, we obtained a patent for Snojax®, the world's first screw-down, clear, non-corrosive, polycarbonate snow guard. In 1985, we innovated further with the release of Snojax II, the world's first glue-down polycarbonate snow guard. By 2000, we introduced two patented SnoBlox® models, "Ace" and "Deuce," offering an economical alternative and resolving the challenge of straddling minor ribs. These models boasted the industry's first patented waffled base design, enhancing adhesive bonding. In 2005, we expanded our offerings with Icejax I and Icejax II, which were validated through rigorous testing by the renowned ATI professional testing laboratory. Our Snojax®, SnoBlox®, Icejax™, and SnowCatcher™ brands are the epitome of robust snow guards in the industry, validated by comprehensive testing.

!