Snow Guards for Agway Metals
Snow guards for Agway Metals Inc. standing seam roofing panels help manage rooftop snow and ice that could slide onto entrances, walkways, loading areas, vehicles, landscaping, and equipment.
Compatible Agway Metals Inc. snow retention options include adhesive-mounted polycarbonate guards such as EcoJax; non-penetrating SnoBar and ColorBar rails; RCB-3 and 2-bar configurations; and SnoCleat RC/RCT guards where the seam allows a secure fit.
- AR, SL Snap-Lock, and NS Nailstrip profiles accept the listed adhesive guards and compatible clamp-on systems.
- Board and Batten profiles and Diamond Batten profiles accept suitable adhesive-mounted guards; their batten caps prevent clamp-on attachments.
- Choose adhesive products only when the roof material, finish, and flat mounting surface allow them.
- Confirm clamp fit with a sample before ordering a complete system.
- Plan product spacing around roof slope, panel width, snow load, roof run, and a full-roof layout.
Important: Panel appearance alone cannot establish compatibility. Verify the exact profile, attachment surface, and roof material before selecting a system. Never screw snow guards through standing seam roof panels. Incorrect attachments can compromise holding strength and roof performance.
⚡ Agway Metals Inc. Primary Quick Selection Guide
Start with the panel family, then check each product in the compatibility chart.
- AR, SL Snap-Lock, and NS Nailstrip: Consider adhesive-mounted polycarbonate guards, compatible SnoBar/ColorBar rails, RCB-3 systems, 2-bar rails, and SnoCleat RC/RCT.
- Board and Batten profiles and Diamond Batten profiles: Choose adhesive-mounted polycarbonate guards that fit. Clamp-on guards and rails do not fit these batten profiles.
- Curved AR installations: Pad-style guards need a flat mounting surface; request project-specific rail guidance.
- Copper roofs: Avoid adhesive-mounted guards and request material-specific compatibility guidance.
About Agway Metals Inc. Roofing Systems
Agway Metals Inc. began in 1979 serving Ontario's agricultural market and expanded into residential, commercial, industrial, and institutional building products. This guide covers its AR, SL Snap-Lock, NS Nailstrip, Board and Batten, and Diamond Batten roof profiles.
Snow Retention Solutions for Agway Metals Inc. Roofing
Use seam-mounted clamps where the profile accepts them, or bond suitable polycarbonate guards to a compatible flat pan. EcoJax offers a polycarbonate option within the adhesive-mounted group. Confirm the attachment method for the specific roof instead of choosing a product solely by size or appearance.
Explore our snow guards for metal roofs and compare the individual products below. YES indicates a listed profile fit, subject to material, finish, mounting surface, and installation requirements. NO identifies a product that does not fit that profile.
Snow Guards for Agway Metals Inc. Standing Seam Roof Panels
Compare all five panel families separately. The adhesive rows apply to suitable flat mounting surfaces, not curved panel areas or copper roofs. A YES for a clamp-on product still requires a successful clamp test fit.
Standing seam warning: Never attach screw-down snow guards through concealed-fastener standing seam panels. Follow the product instructions for compatible adhesive or non-penetrating clamp-on installations.
For panel descriptions, dimensions, and installation considerations, read our Snow Guards for Agway Metals Inc. Standing Seam Metal Roof Panels blog.
| AR Standing Seam Panel | SL Snap-Lock Panels | NS Nailstrip Panel | Board and Batten Panel | Diamond Batten Panel | |
|---|---|---|---|---|---|
 IceJax I |
YES | YES | YES | YES | YES |
 IceJax II |
YES | YES | YES | YES | YES |
 EcoJax |
YES | YES | YES | YES | YES |
 SnoBlox Deuce |
YES | YES | YES | YES | YES |
 SnoBlox Ace |
YES | YES | YES | YES | YES |
 SnoJax II |
YES | YES | YES | YES | YES |
 SnowBreaker |
YES | YES | YES | YES | YES |
 SnoBar Standing Seam |
YES | YES | YES | NO | NO |
 ColorBar Standing Seam |
YES | YES | YES | NO | NO |
 SnoBar RCB-3 |
YES | YES | YES | NO | NO |
 ColorBar RCB-3 |
YES | YES | YES | NO | NO |
 2 Bar SnoBar |
YES | YES | YES | NO | NO |
 2 Bar ColorBar |
YES | YES | YES | NO | NO |
 SnoCleat RC |
YES | YES | YES | NO | NO |
 SnoCleat RCT |
YES | YES | YES | NO | NO |
Striations can leave gaps beneath adhesive-mounted guards. Apply adhesive according to the instructions to fill the mounting footprint and prevent moisture paths.
Surebond SB-190 requires about 28 days at temperatures of at least 50°F to fully cure. Plan the installation window before snow season.
Review rail height and IceStopper placement when managing ice beneath a rail system. Roof material and project loads can affect how many rail rows you need.
Agway Metals Inc. Snow Guard Buying Checklist
- Identify the exact panel: Compare the installed profile with the manufacturer's current specifications.
- Verify the roof material and finish: Confirm that the proposed attachment suits both.
- Check the mounting surface: Adhesive pads need flat areas; clamps need compatible seams.
- Confirm ground snow load: Supply the project location and roof measurements when requesting system guidance.
- Request a full-roof layout: Avoid concentrating retention only above doors, equipment, or other isolated locations.
- Order a test-fit sample: Check hardware fit before committing to the complete order.
Related Resources
Need Help Identifying Your Agway Metals Inc. Panel?
If you are not sure which Agway Metals Inc. panel you have, carefully compare the panel profile, review the detailed Agway Metals Inc. blog post linked above, and order a single test-fit unit before committing to a full project. For project-specific help, contact SnoBlox-Snojax at support@snojax.com or call 1-800-766-5291.
Do you have a metal roof from a different manufacturer?
Visit our "Snow Guard Compatibility by Roof Manufacturer" resource page for detailed information on which snow guards and snow retention systems are compatible with your metal roof.
Compatibility Guidance Note
SnoBlox-Snojax bases this guide’s compatibility information on product testing and field experience with Agway Metals Inc. metal roof panel profiles. Panel manufacturers periodically update profile specifications, and individual project variables, such as seam condition, coating type, and installation method, can affect outcomes. Customers should confirm current panel specifications directly with Agway Metals Inc. and contact SnoBlox-Snojax with project-specific questions before ordering.
Snow Guards for Agway Metals Inc. Roofing Panels – Compatibility & Installation FAQ
Compatible options depend on the panel profile, roof material, and mounting surface. AR, SL Snap-Lock, and NS Nailstrip panels accept suitable adhesive-mounted polycarbonate guards and compatible clamp-on systems. Board and Batten profiles and Diamond Batten profiles require suitable adhesive-mounted guards.
No. Never screw snow guards through Agway standing seam roof panels. Use compatible non-penetrating clamp-on systems or adhesive-mounted guards where the roof material, finish, and mounting surface allow them.
The listed options include IceJax I, IceJax II, EcoJax, SnoBlox Deuce, SnoBlox Ace, SnoJax II, and SnowBreaker, along with compatible SnoCleat RC/RCT guards and SnoBar or ColorBar rail systems. Curved installations require separate review of the mounting surface and hardware.
Yes. Compatible SnoCleat RC and RCT guards and standing-seam SnoBar or ColorBar rail systems offer clamp-on options. Test-fit a clamp sample on the installed seam before ordering a complete system.
NS Nailstrip panels accept the listed adhesive-mounted polycarbonate guards and compatible clamp-on SnoCleat, SnoBar, and ColorBar systems. Confirm the panel profile, roof material, mounting surface, and clamp fit before ordering.
No. The batten caps prevent compatible attachment of the listed clamp-on guards and rail systems. Choose suitable adhesive-mounted polycarbonate guards where the roof material, finish, and flat pan allow bonding.
Yes. EcoJax is a polycarbonate snow guard listed for adhesive mounting on suitable flat areas of the five Agway profiles in this guide. Confirm roof material and finish compatibility, and follow the installation instructions.
No. SnoBlox-Snojax does not recommend bonding adhesive-mounted guards directly to copper roofing. Contact the support team for material-specific guidance and compatible alternatives for the exact panel profile.
Pad-style guards require a suitable flat mounting surface and may not fit curved panel areas. Request project-specific guidance for a compatible rail system, and confirm the seam geometry and hardware fit before ordering.
Surebond SB-190 requires about 28 days at temperatures of at least 50°F to fully cure. Schedule adhesive installations early enough to complete the cure period before snow and ice place loads on the guards.
Yes. Striations can create gaps beneath a guard’s base. Follow the adhesive application instructions to fill the mounting footprint, prevent moisture paths, and confirm the pan provides a suitable bonding surface.
Use a full-roof layout that accounts for the panel profile, roof slope, roof run, panel width, roof material, and ground snow load. Avoid isolated installations above doors or equipment. Contact SnoBlox-Snojax at support@snojax.com or 1-800-766-5291 for project-specific help.