Snow Guards for Ultra Seam

Snow guards for Ultra Seam standing seam roof panels help manage sliding snow and ice above entrances, walkways, parking areas, equipment, and landscaping. Match the snow retention method to the exact panel profile, especially when comparing straight, curved, and batten cap seams.

Compatible Ultra Seam snow retention options include adhesive-mounted polycarbonate guards on suitable flat roof pans and non-penetrating clamp-on guards or rail systems where the seam permits a secure fit.

Curved US-200C and US-150C panels can use compatible clamp-on systems, but the chart does not list pad-style guards.
US-200-SB and US-100CS batten cap panels accept the listed adhesive-mounted guards; the chart lists no clamp-on systems for either profile.
This chart lists no compatible products for curved US-100CSC panels.
Confirm seam shape, roof curvature, pan surface, snow load, and full-roof layout before selecting a system.

Important: Do not penetrate Ultra Seam concealed-fastener panels with screw-down snow guards. Test-fit a clamp on the actual seam before specifying a clamp-on system, and verify that adhesive-mounted products have a suitable bonding surface.

⚡ Ultra Seam Primary Quick Selection Guide

Use this overview to narrow your options, then consult the full profile-by-profile chart below.

US-200, US-175LS, US-150, US-150LS, US-150CL, and US-100NS: These straight profiles have broad charted compatibility with adhesive-mounted polycarbonate guards, SnoCleat RC/RCT, SnoBar/ColorBar standing seam rails, RCB-3 systems, and 2-bar rails.
US-200C and US-150C: The curve rules out pad-style guards; the chart lists SnoCleat RC/RCT and selected SnoBar/ColorBar clamp-on rail systems. Test the clamp on the actual curved seam.
US-200-SB and US-100CS batten cap panels accept the listed adhesive-mounted guards; the chart lists no clamp-on systems for either profile.
US-100CSC: No compatible products.

About Ultra Seam Roofing Systems

Ultra Seam makes standing seam metal roof systems for residential, commercial, and industrial buildings. Its lineup includes mechanically seamed US-200 and US-150 panels; Lok-Seam snap-lock profiles; the US-150CL Clip-Loc; the US-100NS nailstrip; and box batten or batten cap profiles. Several are available in curved configurations. Panel widths, rib heights, seam construction, and pan surfaces vary across this family. A snow retention product shown for one Ultra Seam panel is not automatically suitable for another.

Some profiles offer optional striations that change the bonding surface available to an adhesive-mounted guard. Curved roofs further change where pad-style products can sit. Confirm the panel profile, roof geometry, and attachment method before finalizing a layout or product order.

Snow Retention Solutions for Ultra Seam Roofing

Adhesive-mounted polycarbonate guards bond to a suitable panel pan, while clamp-on SnoCleat guards and rail assemblies grip compatible standing seams without piercing the roof. These attachment methods are not interchangeable. Curved panels in the source chart rule out the pad-style products, while the batten cap construction of US-200-SB and US-100CS limits most clamp-on choices.

See our full range of snow guards for metal roofs and compare each product against the installed Ultra Seam panel below. “YES” indicates that the product is listed as compatible in the Ultra Seam blog chart. “NO” means the pairing is not listed as compatible. Product selection also depends on roof slope, ground snow load, roof run, material, surface condition, and a complete layout.

Snow Guards for Ultra Seam Standing Seam Roof Panels

This guide covers US-200, US-200C, US-175LS, US-150, US-150C, US-200-SB, US-150LS, US-150CL, US-100NS, US-100CS, and US-100CSC. The US-200C, US-150C, and US-100CSC are curved profiles. The US-200-SB and US-100CS use batten cap construction. Check the exact panel column rather than applying the result from a similar-looking seam.

Standing seam warning: Do not screw through a concealed-fastener standing seam roof to install snow guards. Use adhesive-mounted guards only on a suitable bonding surface or clamp-on products only where the seam accepts a secure, tested fit.

Do you need more information about compatible snow guards for Ultra Seam standing seam roof panels? Read our detailed blog, which also contains panel images with alt text: Snow Guards for Standing Seam Metal Roof Panels by Ultra Seam.

	US-200 Panel	US-200C Panel	US-175LS Panel	US-150 Panel	US-150C Panel	US-200-SB Panel	US-150LS Panel	US-150CL Panel	US-100NS Panel	US-100CS Panel	US-100CSC Panel
IceJax I	YES	NO	YES	YES	NO	YES	YES	YES	YES	YES	NO
IceJax II	YES	NO	YES	YES	NO	YES	YES	YES	YES	YES	NO
Ecojax	YES	NO	YES	YES	NO	YES	YES	YES	YES	YES	NO
SnoBlox Deuce	YES	NO	YES	YES	NO	YES	YES	YES	YES	YES	NO
SnoBlox Ace	YES	NO	YES	YES	NO	YES	YES	YES	YES	YES	NO
SnoJax II	YES	NO	YES	YES	NO	YES	YES	YES	YES	YES	NO
SnowBreaker	YES	NO	YES	YES	NO	YES	YES	YES	YES	YES	NO
SnoBar Standing Seam	YES	YES	YES	YES	YES	NO	YES	YES	YES	NO	NO
ColorBar Standing Seam	YES	YES	YES	YES	YES	NO	YES	YES	YES	NO	NO
SnoBar RCB-3	YES	YES	YES	YES	YES	NO	YES	YES	YES	NO	NO
ColorBar RCB-3	YES	YES	YES	YES	YES	NO	YES	YES	YES	NO	NO
2 Bar SnoBar	YES	YES	YES	YES	YES	NO	YES	YES	YES	NO	NO
2 Bar ColorBar	YES	YES	YES	YES	YES	NO	YES	YES	YES	NO	NO
SnoCleat RC	YES	YES	YES	YES	YES	NO	YES	YES	YES	NO	NO
SnoCleat RCT	YES	YES	YES	YES	YES	NO	YES	YES	YES	NO	NO

The straight US-200, US-175LS, US-150, US-150LS, US-150CL, and US-100NS profiles are broadly compatible with adhesive-mounted and clamp-on products.

US-200C and US-150C curved panels list clamp-on guards and rails but no pad-style guards.

US-200-SB and US-100CS batten cap panels accept the listed adhesive guards, but the chart marks all rails and SnoCleat options NO for both profiles.

US-100CSC has NO across the entire matrix.

Striations may need a more generous adhesive application to fill gaps beneath a guard. Test a clamp sample on the installed seam before committing to a full rail system. IceStoppers can help manage ice passing beneath a rail, especially above walkways or parking areas.

Ultra Seam Snow Guard Buying Checklist

Confirm the exact Ultra Seam panel name before choosing a product; identify curved, batten cap, and striated configurations.
Identify the attachment method: adhesive-mounted pan guard or compatible non-penetrating seam clamp.
Check ground snow load and roof run. Higher loads or larger roof areas may call for an engineered rail layout.
Request a complete layout rather than placing guards only above isolated entrances or equipment.
Plan adhesive installation around SureBond SB-190 cure conditions and verify the roof surface is suitable.
Order a sample or single unit for a test fit when you need to confirm seam shape or clamp grip.

Related Resources

Need Help Identifying Your Ultra Seam Panel?

If you are not sure which Ultra Seam panel you have, carefully compare the panel profile, review the detailed Ultra Seam blog post linked above, and order a single test-fit unit before committing to a full project. For project-specific help, contact SnoBlox-Snojax at support@snojax.com or call 1-800-766-5291.

Do you have a metal roof from a different manufacturer?

Visit our "Snow Guard Compatibility by Roof Manufacturer" resource page for detailed information on which snow guards and snow retention systems are compatible with your metal roof.

Compatibility Guidance Note

SnoBlox-Snojax bases the compatibility information presented in this guide on product testing and field experience with Ultra Seam metal roof panel profiles. Panel manufacturers periodically update profile specifications, and project variables such as seam condition, coating type, and installation method can affect outcomes. Customers should confirm current panel specifications directly with Ultra Seam and contact SnoBlox-Snojax with project-specific questions before ordering.