Snow Guards & Snow Retention for RLS Metal Systems
Compatible Snow Guards for RLS Metal Systems
SnoBlox-Snojax offers snow guards that are compatible with RLS Metal Systems standing seam metal roof systems. Our pad-style and bar-style snow retention systems help prevent dangerous snow slides that can damage gutters, HVAC units, and property below. Our snow retention solutions are proven for durability and performance and are compatible with most Garco metal panel systems.
Use our Snow Guard Spacing Guide to determine proper placement and quantity for your project. For help selecting the correct guard for your RLS Metal Systems metal roof, contact our team or request a free quote. Always check with the panel manufacturer to confirm the compatibility of our snow retention systems.
Tip: Always install pad-style snow guards in multiple staggered rows across the entire roof to evenly distribute the snow loads. Space multiple rows of snow rails evenly as they go up the slope of the roof.
| DMC 150SL Panel | DMC 175S Panel | DMC 100SS Panel | DMC 150SS Panel | DMC 200S Panel | |
|---|---|---|---|---|---|
 Ecojax |
YES | YES | YES | YES | YES |
 IceJax I |
YES | YES | YES | YES | YES |
 IceJax II |
YES | YES | YES | YES | YES |
 SnoBlox Deuce |
YES | YES | YES | YES | YES |
 Ace |
YES | YES | YES | YES | YES |
 Snojax II |
YES | YES | YES | YES | YES |
 SnowBreaker |
YES | YES | YES | YES | YES |
 SnoBar |
YES | YES | YES | YES | YES |
 ColorBar |
YES | YES | YES | YES | YES |
 SnoBar RCB-3 |
YES | YES | YES | YES | YES |
 ColorBar RCB-3 |
YES | YES | YES | YES | YES |
 2 Bar SnoBar |
YES | YES | YES | YES | YES |
 2 Bar ColorBar |
YES | YES | YES | YES | YES |
 SnoCleat RC |
YES | YES | YES | YES | YES |
 SnoCleat RCT |
YES | YES | YES | YES | YES |
Adhesive Mounted Snow Guards for RLS Metal Systems
Seam Mounted Snow Retention for RLS Metal Systems
Frequently Asked Questions about Snow Guards for RLS Metal Systems
Yes, any seam mounted SnowCleat, SnoBar, and ColorBar products will fit the RLS DMC 150SL panel profile.
Adhesive-mounted guards are suitable for all standing seam RLS Metal Systems panels such as the DMC 200S, DMC 150SL, DMC 175S and DMC 100SS panels that have flat surfaces at least 1.5 inches wide. Always follow our installation spacing guidelines and check with the panel manufacturer for warranty information.
The RLS Metal Systems standing seam panel widths are 12 to 20 inches. Determining the appropriate spacing depends on the roof pitch, panel length, and the local snow load rating. Consult our SnoBar Spacing Page for standing seam panels.