null Skip to main content

Snow Guards & Snow Retention for Master Steel Roofing

Snow guards for Master Steel Roofing panels help manage rooftop snow and ice above entrances, sidewalks, loading areas, parking spaces, landscaping, and equipment. Select a SnoBlox-Snojax system by the exact standing seam profile, roof material, and project conditions.

Compatible Master Steel Roofing snow retention options include adhesive-mounted polycarbonate guards such as Ecojax and SnoBlox Deuce, compatible SnoCleat products, and SnoBar/ColorBar rail assemblies. The seam shape determines which clamp and bracket configurations you can use.

  • Confirm the panel name before selecting snow guards or attachment hardware.
  • Use adhesive-mounted guards only where the panel provides a suitable flat bonding surface.
  • Choose clamp-on systems that match the seam geometry.
  • Do not install screw-down snow guards through standing seam panels.
  • Consider roof slope, snow load, panel material, seam spacing, roof length, and the complete installation layout.
Important: Similar-looking seams can require different attachment hardware. Check the compatibility chart before ordering and confirm the system configuration with SnoBlox-Snojax. Product fit alone does not determine how many guards, clamps, or rail rows a project requires.

⚡ Master Steel Roofing Quick Selection Guide

Identify your panel below, then review the product-by-product chart before choosing a system.

  • MSR 100 Snap-Lock: Adhesive-mounted guards only; the listed clamp-on systems do not fit its short, tapered seam.
  • MSR 150 Snap-Lock and MSR 200 Mechanical: Accept the listed adhesive guards, standing seam rails, RCB-3 rails, 2-bar systems, and SnoCleat RC/RCT.
  • M 138T, M 238T, and Trap-Tee: Use the listed adhesive guards on suitable flat surfaces, or compatible RCB-3/2-bar rails and SnoCleat RCT. Standard SnoBar clamps and RoofClamp RC do not fit these seams.
  • Curved M 138T and M 238T roofs: Request project-specific review of compatible clamp-on systems. Adhesive-mounted guards require a flat bonding surface beneath the entire guard base.

About Master Steel Roofing Systems

Master Steel Roofing manufactures standing seam roof panels in North Central Indiana. This guide covers snap-lock nailstrip, mechanically seamed, and T-seam profiles. Each profile must match the appropriate snow retention hardware.

Snow Retention Solutions for Master Steel Roofing

Individual adhesive-mounted guards and seam-mounted rail systems offer different approaches to managing rooftop snow. Ecojax, IceJax I, IceJax II, SnoBlox Deuce, SnoBlox Ace, and SnoJax II are polycarbonate options. SnowBreaker helps break up sliding snow rather than retaining it like a holding guard. Rail systems require compatible clamps and brackets for the installed panel.

Browse our snow guards for metal roofs and review the chart below. YES identifies a listed panel/product fit. NO identifies an incompatible combination. A YES does not establish a project-specific load rating or installation layout.

Snow Guards for Master Steel Roofing Standing Seam Roof Panels

This guide covers MSR 100 Snap-Lock, MSR 150 Snap-Lock, MSR 200 Mechanical, M 138T, M 238T, and Trap-Tee. Verify the installed profile and mounting surface before choosing products.

Standing seam warning: Do not fasten screw-down snow guards through concealed-fastener standing seam panels. Choose compatible clamp-on hardware or adhesive-mounted guards on an approved bonding surface.

For panel dimensions, profile images, and attachment details, read our full blog: Snow Retention Solutions for Master Steel Roofing’s Standing Seam Roofs.

  MSR 100 Snap-Lock Panel MSR 150 Snap-Lock Panel MSR 200 Mechanical Panel M 138T Panel M 238T Panel Trap-Tee Panel
IceJax I
IceJax I		 YES YES YES YES YES YES
IceJax II
IceJax II		 YES YES YES YES YES YES
Ecojax
Ecojax		 YES YES YES YES YES YES
SnoBlox Deuce
SnoBlox Deuce		 YES YES YES YES YES YES
SnoBlox Ace
SnoBlox Ace		 YES YES YES YES YES YES
SnoJax II
SnoJax II		 YES YES YES YES YES YES
SnowBreaker
SnowBreaker		 YES YES YES YES YES YES
SnoBar Standing Seam
SnoBar Standing Seam		 NO YES YES NO NO NO
ColorBar Standing Seam
ColorBar Standing Seam		 NO YES YES NO NO NO
SnoBar RCB-3
SnoBar RCB-3		 NO YES YES YES YES YES
ColorBar RCB-3
ColorBar RCB-3		 NO YES YES YES YES YES
2 Bar SnoBar
2 Bar SnoBar		 NO YES YES YES YES YES
2 Bar ColorBar
2 Bar ColorBar		 NO YES YES YES YES YES
SnoCleat RC
SnoCleat RC		 NO YES YES NO NO NO
SnoCleat RCT
SnoCleat RCT		 NO YES YES YES YES YES

The chart applies to the listed panel profiles with suitable mounting surfaces. Curved roofing requires separate attachment review. For T-seam installations, confirm the required bracket and clamp configuration for the selected rail system or SnoCleat RCT guard.

Apply adhesive according to the product instructions, ensuring sufficient coverage across striations to prevent gaps beneath the guard. Confirm roof material compatibility, required installation temperatures, and the curing window before scheduling adhesive work.

Panel material can affect the required rail layout. Request project-specific guidance for aluminum or copper roofs, curved sections, valleys, pitch changes, and other roof transitions. IceStopper attachments help manage snow and ice beneath compatible rail systems.

Master Steel Roofing Snow Guard Buying Checklist

  • Confirm the exact Master Steel Roofing panel name before choosing any product.
  • Identify the roof type: snap-lock, mechanically seamed, or T-seam.
  • Verify the attachment method: adhesive, compatible clamp-on hardware, or a specified rail/bracket configuration.
  • Check ground snow load. Individual adhesive-mounted guards are generally best suited for lighter snow-load applications. Higher loads often require rail systems.
  • Request a layout rather than installing only in isolated areas such as doors, chimneys, or HVAC equipment.
  • Order samples or single units when you need a test fit. SnoBlox-Snojax products and components are available with no minimum order requirement.

Need Help Identifying Your Master Steel Roofing Panel?

If you are not sure which Master Steel Roofing panel you have, carefully compare the panel profile, review the detailed Master Steel Roofing blog post linked above, and order a single test-fit unit before committing to a full project. For project-specific help, contact SnoBlox-Snojax at support@snojax.com or call 1-800-766-5291.

Do you have a metal roof from a different manufacturer?

Visit our "Snow Guard Compatibility by Roof Manufacturer" resource page for detailed information on which snow guards and snow retention systems are compatible with your metal roof.

Compatibility Guidance Note

SnoBlox-Snojax bases the compatibility information presented in this guide on product testing and field experience with Master Steel Roofing metal roof panel profiles. Panel manufacturers periodically update profile specifications, and individual project variables, such as seam condition, coating type, and installation method, can affect outcomes. Customers should confirm current panel specifications directly with Master Steel Roofing and contact SnoBlox-Snojax with project-specific questions before ordering.

Snow Guards for Master Steel Roofing Metal Roofing Panels – Compatibility & Installation FAQ

Compatible options depend on the panel profile. Adhesive-mounted polycarbonate guards, including Ecojax, IceJax I, IceJax II, SnoBlox Deuce, SnoBlox Ace, and Snojax II, fit suitable flat mounting surfaces on the listed panels. Certain profiles also accept clamp-on SnoCleat guards and SnoBar or ColorBar rail systems.

The MSR 100 accepts compatible adhesive-mounted polycarbonate snow guards. Its short, tapered seam does not support the clamp-on SnoCleat, SnoBar, or ColorBar systems listed in the compatibility chart.
Yes. The MSR 150 is compatible with the listed SnoCleat RC and RCT guards, SnoBar and ColorBar standing seam rails, RCB-3 rail systems, and 2-bar systems. Confirm the correct attachment hardware and layout before ordering.
The MSR 200 accepts the listed adhesive-mounted polycarbonate guards and compatible clamp-on systems, including SnoCleat RC/RCT, SnoBar, ColorBar, RCB-3 rails, and 2-bar rails. Select products based on roof material and project conditions.
Both profiles accept SnoCleat RCT and the listed RCB-3 and 2-bar rail systems with the appropriate hardware. Standard SnoBar clamps and RoofClamp RC are not compatible with these T-seam profiles.
The compatibility chart lists adhesive-mounted polycarbonate guards, SnoCleat RCT, RCB-3 rails, and 2-bar rails. Clamp-on installations require the appropriate T-seam hardware. Standard standing seam SnoBar and ColorBar configurations and SnoCleat RC are marked incompatible.

Adhesive-mounted guards require a flat bonding surface beneath the entire guard base. For curved M 138T and M 238T roofs, request project-specific review of compatible clamp-on systems and the required layout.

Do not install screw-down snow guards through these standing seam panels. Use compatible non-penetrating clamp-on systems or adhesive-mounted guards where the roof material and mounting surface permit them.
Yes. Striations can leave gaps beneath a guard if adhesive coverage is insufficient. Follow the installation instructions to fill those gaps and help prevent trapped moisture from freezing beneath the guard and weakening the bond.
Yes. Steel, aluminum, and copper can require different installation considerations. Softer panel materials may need additional rail rows, and you must confirm adhesive compatibility with the roof material and finish.
Request a project-specific layout using the roof dimensions, slope, panel profile, seam spacing, roof material, and ground snow load. The compatibility chart identifies product fit; it does not establish the quantity or row spacing required for your roof.
Compare the seam shape and panel dimensions with the profile information and images in the linked Master Steel Roofing blog. Confirm the panel name with your roofing supplier or manufacturer, and contact SnoBlox-Snojax at support@snojax.com or 1-800-766-5291 for help selecting the right product.

!