Snow Guards for Ceco Building Systems
Snow guards for Ceco Building Systems roofing panels help manage the sudden release of snow and ice from metal roofs above walkways, doors, parking areas, loading zones, landscaping, equipment, and other vulnerable areas. The correct SnoBlox-Snojax product depends on whether the Ceco roof uses a standing-seam concealed-fastener system or an exposed-fastener panel, followed by the exact panel profile installed on the building.
- Ceco Building Systems standing-seam and exposed-fastener panels require different snow-retention attachment methods.
- Standing seam panels should use compatible clamp-on systems or adhesive-mounted guards, not screw-down attachments.
- Exposed-fastener panels may accept glue-down, screw-down, SnowCatcher, PBR rail, or SnoCleat PBR systems, depending on panel shape and available mounting area.
- Ceco Double-Lok, BattenLok HS, SuperLok, and Ultra-Dek profiles show broad compatibility with adhesive and clamp-on options.
- Final product selection should account for roof slope, panel width, snow load, run length, roof material, panel striations, and full-roof layout requirements.
⚡ Ceco Building Systems Primary Quick Selection Guide
Use this section for fast profile-level direction. Confirm the exact product fit in the full compatibility charts below.
- Double-Lok panels: Compatible with adhesive-mounted polycarbonate guards, SnoBar/ColorBar standing seam rails, RCB-3 systems, 2-bar rails, and SnoCleat RC/RCT.
- BattenLok HS, SuperLok, and Ultra-Dek panels: Compatible with the same broad group of adhesive-mounted guards and non-penetrating clamp-on snow retention systems.
- PBR exposed-fastener panels: Compatible with selected polycarbonate guards, SnowCatcher, SnoCleat PBR, SnoBar PBR, and ColorBar PBR when installed according to project requirements.
- Standing seam warning: Do not fasten screw-down snow guards through concealed-fastener standing seam panels.
About Ceco Building Systems Roofing Systems
Ceco Building Systems has supplied metal building systems since 1947 and is now part of Cornerstone Building Brands. Its roofing lineup includes concealed-fastener standing-seam profiles and exposed-fastener PBR panels, so snow guard compatibility must match the specific Ceco panel installed on the building.
Snow Retention Solutions for Ceco Building Systems Roofing
Ceco Building Systems standing-seam panels and exposed-fastener panels do not use the same snow-retention attachment method. Standing seam roofs typically require non-penetrating clamp-on systems when the seam geometry allows it, or adhesive-mounted guards when the panel pan provides a suitable bonding surface. Exposed-fastener panels may accept screw-down products when attached through the low flats and into adequate structure.
See our full range of snow guards for metal roofs and use the charts below to confirm which SnoBlox-Snojax products fit each Ceco Building Systems panel. “YES” indicates the product is shown as a fit for that panel. “NO” means it is not shown as compatible for that profile.
Snow Guards for Ceco Building Systems Standing Seam Roof Panels
The Ceco Building Systems standing-seam profiles in this guide include Double-Lok, BattenLok HS, SuperLok, and Ultra-Dek. These profiles vary by seam shape, rib height, panel width, seaming method, and surface configuration. All four panel groups work with adhesive-mounted polycarbonate guards and compatible clamp-on snow retention systems.
Standing seam warning: Do not install screw-down snow guards through concealed-fastener standing-seam roof panels. Use compatible clamp-on products where the seam accepts them, or adhesive-mounted guards where a flat bonding surface is available.
Do you need more information about our compatible snow guards for Ceco Building Systems standing-seam roof panels? Check out our full blog here: Snow Guards for Standing Seam Metal Roof Panels by Ceco Building Systems.
| Double-Lok Profile | BattenLok HS Profile | SuperLok Profile | Ultra-Dek Profile | |
|---|---|---|---|---|
 IceJax I |
YES | YES | YES | YES |
 IceJax II |
YES | YES | YES | YES |
 EcoJax |
YES | YES | YES | YES |
 SnoBlox Deuce |
YES | YES | YES | YES |
 SnoBlox Ace |
YES | YES | YES | YES |
 SnoJax II |
YES | YES | YES | YES |
 SnowBreaker |
YES | YES | YES | YES |
 SnoBar Standing Seam |
YES | YES | YES | YES |
 ColorBar Standing Seam |
YES | YES | YES | YES |
 SnoBar RCB-3 |
YES | YES | YES | YES |
 ColorBar RCB-3 |
YES | YES | YES | YES |
 2 Bar SnoBar |
YES | YES | YES | YES |
 2 Bar ColorBar |
YES | YES | YES | YES |
 SnoCleat RC |
YES | YES | YES | YES |
 SnoCleat RCT |
YES | YES | YES | YES |
Double-Lok, BattenLok HS, SuperLok, and Ultra-Dek profiles offer broad standing-seam compatibility because they accept many adhesive-mounted guards and compatible clamp-on snow-retention systems.
Striated panels may require a heavier adhesive application to fill small gaps and reduce moisture paths beneath the guard. If using a rail system, IceStopper attachments are recommended above pedestrian or parking areas to help manage snow and ice beneath the rail.
Snow Guards for Ceco Building Systems Exposed Fastener Roof Panels
Ceco Building Systems exposed-fastener compatibility in this guide centers on the PBR profile. The PBR panel has a 36-inch coverage width, major ribs spaced at 12-inch intervals, and a rib height of about 1.25 inches. Its low-flat areas and rib layout allow several individual snow guard and rail-style snow retention options when the system is attached correctly.
Exposed fastener reminder: When screw-down snow guards or rails are compatible, they should be attached through the low flats of the panel and into adequate structure. Do not install individual snow guards or rail systems directly on the high ribs of the panel.
Do you need more information about our compatible snow guards for Ceco Building Systems exposed-fastener roof panels? Check out our full blog here: Snow Guards for Exposed Fastener Metal Roof Panels by Ceco Building Systems.
| PBR Profile | |
|---|---|
IceJax I |
YES |
IceJax II |
YES |
EcoJax |
YES |
SnoBlox Deuce |
YES |
SnoBlox Ace |
YES |
 SnoJax I |
YES |
SnoJax II |
YES |
SnowBreaker |
YES |
 SnowCatcher |
YES |
 SnoCleat PBR |
YES |
 SnoCleat 2.67 |
NO |
 SnoBar PBR |
YES |
 ColorBar PBR |
YES |
 SnoBar 2.67 |
NO |
 ColorBar 2.67 |
NO |
Ceco Building Systems PBR is compatible with many pad-style polycarbonate guards, including EcoJax, SnoBlox Deuce, SnowCatcher, SnoCleat PBR, SnoBar PBR, and ColorBar PBR.
SnoCleat 2.67, SnoBar 2.67, and ColorBar 2.67 do not work with the Ceco Building Systems PBR profile because these systems only work with 2.67-inch corrugated panel geometry.
For screw-down installations, fasteners must engage suitable structure beneath the roof panel. For adhesive-mounted polycarbonate guards, plan installation around SureBond SB-190 cure requirements and avoid copper roofing applications.
Ceco Building Systems Snow Guard Buying Checklist
- Confirm the exact Ceco Building Systems panel name before choosing any product.
- Identify the roof type: standing seam, concealed fastener, exposed fastener, PBR-style, or corrugated.
- Verify the attachment method: adhesive, screw-down, clamp-on, PBR bracket, or 2.67 corrugated bracket.
- Check ground snow load. Individual glue-down or screw-down guards are generally best suited for lighter snow-load applications. At the same time, higher loads often require rail systems.
- Request a layout rather than installing only in isolated areas such as doors, chimneys, or HVAC equipment.
- Order samples or single units when a test fit is needed. SnoBlox-Snojax products and components are available with no minimum order requirement.
Related Resources
Need Help Identifying Your Ceco Building Systems Panel?
If you are not sure which Ceco Building Systems panel you have, carefully compare the panel profile, review the two detailed Ceco Building Systems blog posts linked above, and order a single test-fit unit before committing to a full project. For project-specific help, contact SnoBlox-Snojax at support@snojax.com or call 1-800-766-5291.
Do you have a metal roof from a different manufacturer?
Visit our "Snow Guard Compatibility by Roof Manufacturer" resource page for detailed information on which snow guards and snow retention systems are compatible with your metal roof.
Compatibility Guidance Note
SnoBlox-Snojax bases the compatibility information presented in this guide on product testing and field experience with Ceco Building Systems metal roof panel profiles. Panel manufacturers periodically update profile specifications, and individual project variables, such as seam condition, coating type, and installation method, can affect outcomes. Customers are encouraged to confirm current panel specifications directly with Ceco Building Systems and to contact SnoBlox-Snojax with project-specific questions before ordering.