Snow Guards for Central States
Snow guards for Central States Manufacturing roofing panels help control the sudden release of snow and ice from rooftops above sidewalks, entrances, loading areas, parking spaces, landscaping, equipment, and other areas where sliding snow can create hazards or property damage. The correct SnoBlox-Snojax product depends on whether the Central States Manufacturing roof uses a standing-seam concealed-fastener system or an exposed-fastener panel, and, if the latter, on the exact panel profile installed on the building.
- Central States Manufacturing standing-seam and exposed-fastener panels require different snow-retention attachment methods.
- Standing seam panels should use compatible clamp-on systems or adhesive-mounted guards, not screw-down attachments.
- Exposed-fastener panels may accept glue-down, screw-down, SnowCatcher, PBR rail, 2.67 corrugated rail, SnoCleat PBR, or SnoCleat 2.67 systems, depending on the panel profile.
- Horizon-Loc, Central Span, Central Snap, Central Seam Plus, and Central-Loc profiles show broad compatibility with adhesive and clamp-on options.
- Final product selection should account for roof slope, panel width, snow load, run length, roof material, panel striations, available mounting flats, and full-roof layout requirements.
⚡ Central States Manufacturing Primary Quick Selection Guide
Use this section for fast profile-level direction. Confirm the exact product fit in the full compatibility charts below.
- Horizon-Loc, Central Span, Central Snap, Central Seam Plus, and Central-Loc standing seam panels: Compatible with adhesive-mounted polycarbonate guards, SnoBar/ColorBar standing seam rails, RCB-3 systems, 2-bar rails, and SnoCleat RC/RCT.
- Panel-Loc Plus, M-Loc, R-Loc, Panel-Loc, 7.2 Panel, and CD 2000 exposed-fastener panels: Compatible with selected individual snow guards and rail systems based on the panel flats, rib spacing, and available attachment area.
- BarnMaster corrugated panels: Compatible with the 2.67 corrugated product family shown in the exposed-fastener chart.
- Standing seam warning: Do not fasten screw-down snow guards through concealed-fastener standing seam panels.
About Central States Manufacturing Roofing Systems
Central States Manufacturing produces metal roofing, siding, and building components for residential, agricultural, commercial, and post-frame projects. The company began in Rogers, Arkansas, in 1988 and grew into an employee-owned manufacturer with multiple facilities serving customers across the United States. Its roofing lineup includes concealed-fastener standing seam panels and exposed-fastener profiles, so snow guard compatibility must match the exact Central States Manufacturing panel installed.
Snow Retention Solutions for Central States Manufacturing Roofing
Central States Manufacturing standing-seam panels and exposed-fastener panels do not use the same snow-retention attachment method. Standing seam roofs typically require non-penetrating clamp-on systems when the seam geometry allows it, or adhesive-mounted guards when the panel pan provides a suitable bonding surface. Exposed-fastener panels may accept screw-down products when attached through the proper panel area and into adequate structure.
See our full range of snow guards for metal roofs and use the charts below to confirm which SnoBlox-Snojax products fit each Central States Manufacturing panel. “YES” indicates the product is shown as a fit for that panel. “NO” means it is not shown as compatible for that profile.
Snow Guards for Central States Manufacturing Standing Seam Roof Panels
Central States Manufacturing standing seam profiles in this guide include Horizon-Loc, Central Span, Central Snap, Central Seam Plus, and Central-Loc. These panels differ by seam style, rib height, panel width, seaming method, and surface configuration. The profiles in this section work with adhesive-mounted polycarbonate guards and compatible clamp-on snow retention systems.
Standing seam warning: Do not install screw-down snow guards through concealed-fastener standing-seam roof panels. Use compatible clamp-on products where the seam accepts them, or adhesive-mounted guards where a flat bonding surface is available.
Do you need more information about our compatible snow guards for Central States Manufacturing standing-seam roof panels? Check out our full blog here: Snow Guards for Standing Seam Metal Roof Panels by Central States Manufacturing.
| Horizon-Loc Profile | Central Span Profile | Central Snap Profile | Central Seam Plus Profile | Central-Loc Profile | |
|---|---|---|---|---|---|
 IceJax I |
YES | YES | YES | YES | YES |
 IceJax II |
YES | YES | YES | YES | YES |
 EcoJax |
YES | YES | YES | YES | YES |
 SnoBlox Deuce |
YES | YES | YES | YES | YES |
 SnoBlox Ace |
YES | YES | YES | YES | YES |
 SnoJax II |
YES | YES | YES | YES | YES |
 SnowBreaker |
YES | YES | YES | YES | YES |
 SnoBar Standing Seam |
YES | YES | YES | YES | YES |
 ColorBar Standing Seam |
YES | YES | YES | YES | YES |
 SnoBar RCB-3 |
YES | YES | YES | YES | YES |
 ColorBar RCB-3 |
YES | YES | YES | YES | YES |
 2 Bar SnoBar |
YES | YES | YES | YES | YES |
 2 Bar ColorBar |
YES | YES | YES | YES | YES |
 SnoCleat RC |
YES | YES | YES | YES | YES |
 SnoCleat RCT |
YES | YES | YES | YES | YES |
Horizon-Loc, Central Span, Central Snap, Central Seam Plus, and Central-Loc profiles offer broad standing-seam compatibility because they accept many adhesive-mounted guards and compatible clamp-on snow-retention systems.
Striated panels may require a heavier adhesive application to fill small gaps and reduce moisture paths beneath the guard. If using a rail system, IceStopper attachments are recommended above pedestrian or parking areas to help manage snow and ice beneath the rail.
Snow Guards for Central States Manufacturing Exposed Fastener Roof Panels
Central States Manufacturing exposed-fastener compatibility in this guide includes Panel-Loc Plus, M-Loc, R-Loc, Panel-Loc, 7.2 Panel, CD 2000, and BarnMaster. These profiles vary by rib spacing, rib height, panel width, flat mounting area, and corrugated geometry, so product compatibility changes from one panel to another.
Exposed fastener reminder: When screw-down snow guards or rails are compatible, they should be attached through the proper panel area and into adequate structure. Do not install individual snow guards or rail systems directly on high ribs unless the specific corrugated product system calls for that mounting method.
Do you need more information about our compatible snow guards for Central States Manufacturing exposed-fastener roof panels? Check out our full blog here: Snow Guards for Exposed Fastener Metal Roof Panels by Central States Manufacturing.
| Panel-Loc Plus Profile | M-Loc Profile | R-Loc Profile | Panel-Loc Profile | 7.2 Panel Profile | CD 2000 Profile | BarnMaster Profile | |
|---|---|---|---|---|---|---|---|
| IceJax I |
YES | YES | YES | YES | NO | NO | NO |
| IceJax II |
NO | YES | YES | NO | NO | NO | NO |
| EcoJax |
YES | YES | YES | YES | YES | YES | NO |
| SnoBlox Deuce |
YES | YES | YES | YES | YES | YES | NO |
| SnoBlox Ace |
NO | YES | YES | NO | NO | NO | NO |
 SnoJax I |
YES | YES | YES | YES | NO | NO | NO |
| SnoJax II |
NO | YES | YES | NO | NO | NO | NO |
| SnowBreaker |
YES | YES | YES | YES | YES | YES | NO |
 SnowCatcher |
YES | YES | YES | YES | NO | YES | NO |
 SnoCleat PBR |
YES | YES | YES | YES | NO | YES | NO |
 SnoCleat 2.67 |
NO | NO | NO | NO | NO | NO | YES |
 SnoBar PBR |
YES | YES | YES | YES | YES | YES | NO |
 ColorBar PBR |
YES | YES | YES | YES | YES | YES | NO |
 SnoBar 2.67 |
NO | NO | NO | NO | NO | NO | YES |
 ColorBar 2.67 |
NO | NO | NO | NO | NO | NO | YES |
Central States Manufacturing exposed-fastener panels require profile-specific product selection because rib spacing, flat width, and corrugated geometry vary across the product line.
SnoCleat 2.67, SnoBar 2.67, and ColorBar 2.67 are shown only for BarnMaster.
For screw-down installations, fasteners must engage suitable structure beneath the roof panel. For adhesive-mounted polycarbonate guards, plan installation around SureBond SB-190 cure requirements and avoid copper roofing applications.
Central States Manufacturing Snow Guard Buying Checklist
- Confirm the exact Central States Manufacturing panel name before choosing any product.
- Identify the roof type: standing seam, concealed fastener, exposed fastener, PBR-style, or corrugated.
- Verify the attachment method: adhesive, screw-down, clamp-on, PBR bracket, or 2.67 corrugated bracket.
- Check ground snow load. Individual glue-down or screw-down guards are generally best suited for lighter snow-load applications. At the same time, higher loads often require rail systems.
- Request a layout rather than installing only in isolated areas such as doors, chimneys, or HVAC equipment.
- Order samples or single units when a test fit is needed. SnoBlox-Snojax products and components are available with no minimum order requirement.
Related Resources
- Snow Guards for Metal Roofs
- Snow Guards for Standing Seam Metal Roof Panels by Central States Manufacturing
- Snow Guards for Exposed Fastener Metal Roof Panels by Central States Manufacturing
- Snow Guard Compatibility by Roof Manufacturer
- Snow Guard Layout & Spacing Guide
- Snow Guards: What Works and What Does Not
Need Help Identifying Your Central States Manufacturing Panel?
If you are not sure which Central States Manufacturing panel you have, carefully compare the panel profile, review the two detailed Central States Manufacturing blog posts linked above, and order a single test-fit unit before committing to a full project. For project-specific help, contact SnoBlox-Snojax at support@snojax.com or call 1-800-766-5291.
Do you have a metal roof from a different manufacturer?
Visit our "Snow Guard Compatibility by Roof Manufacturer" resource page for detailed information on which snow guards and snow retention systems are compatible with your metal roof.
Compatibility Guidance Note
SnoBlox-Snojax bases the compatibility information presented in this guide on product testing and field experience with Central States Manufacturing metal roof panel profiles. Panel manufacturers periodically update profile specifications, and individual project variables, such as seam condition, coating type, and installation method, can affect outcomes. Customers are encouraged to confirm current panel specifications directly with Central States Manufacturing and to contact SnoBlox-Snojax with project-specific questions before ordering.