Snow Guards for Everlast Roofing
Snow guards for Everlast Roofing panels help control the sudden release of snow and ice from rooftops above sidewalks, entrances, driveways, loading areas, landscaping, equipment, and other locations where sliding snow can cause damage or safety concerns. The correct SnoBlox-Snojax product depends on whether the Everlast Roofing roof uses a standing-seam concealed-fastener system or an exposed-fastener panel, and, if the latter, on the exact panel profile on the building.
- Everlast Roofing standing-seam and exposed-fastener panels require different snow-retention attachment methods.
- Standing seam panels should use compatible clamp-on systems or adhesive-mounted guards, not screw-down attachments.
- Exposed-fastener panels may accept glue-down, screw-down, SnowCatcher, PBR rail, or SnoCleat PBR systems, depending on panel shape and available mounting area.
- Everloc and Everseam standing-seam profiles offer broad compatibility with adhesive and clamp-on options.
- Final product selection should account for roof slope, panel width, snow load, run length, roof material, panel striations, and full-roof layout requirements.
⚡ Everlast Roofing Primary Quick Selection Guide
Use this section for fast profile-level direction. Confirm the exact product fit in the full compatibility charts below.
- Everloc and Everseam standing seam panels: Compatible with adhesive-mounted polycarbonate guards, SnoBar/ColorBar standing seam rails, RCB-3 systems, 2-bar rails, and SnoCleat RC/RCT.
- PBR exposed-fastener panels: Compatible with selected polycarbonate guards, SnowCatcher, SnoCleat PBR, SnoBar PBR, and ColorBar PBR when installed according to project requirements.
- Everlast II exposed-fastener panels: Compatible with selected polycarbonate guards, SnowCatcher, SnoCleat PBR, SnoBar PBR, and ColorBar PBR.
- EverDrain panels: No current SnoBlox-Snojax products show compatibility due to the narrow flat areas in the available panel information.
- Twin Rib panels: Compatible with a narrower group of products, including IceJax I, EcoJax, SnoBlox Deuce, SnowBreaker, SnoCleat PBR, SnoBar PBR, and ColorBar PBR.
- Standing seam warning: Do not fasten screw-down snow guards through concealed-fastener standing seam panels.
About Everlast Roofing Systems
Everlast Roofing manufactures metal roofing and siding products for residential, agricultural, commercial, and light commercial projects. The company offers both concealed-fastener standing seam panels and exposed-fastener panels, so snow guard compatibility must match the exact Everlast Roofing profile installed on the building.
Snow Retention Solutions for Everlast Roofing
Everlast Roofing standing-seam panels and exposed-fastener panels do not use the same snow-retention attachment method. Standing seam roofs typically require non-penetrating clamp-on systems when the seam geometry allows, or adhesive-mounted guards when the panel provides a suitable bonding surface. Exposed-fastener panels may accept screw-down products when installers attach them through the low flats and into an adequate structure.
See our full range of snow guards for metal roofs and use the charts below to confirm which SnoBlox-Snojax products fit each Everlast Roofing panel. “YES” indicates that the product fits that panel. “NO” means the product is not compatible with that profile.
Snow Guards for Everlast Roofing Standing Seam Roof Panels
The standing seam profiles in this guide from Everlast Roofing include Everloc and Everseam. These profiles differ by panel width, seam height, attachment style, and surface configuration. Both panels work with adhesive-mounted polycarbonate guards and compatible clamp-on snow retention systems.
Standing seam warning: Do not install screw-down snow guards through concealed-fastener standing-seam roof panels. Use compatible clamp-on products where the seam accepts them, or adhesive-mounted guards where a flat bonding surface exists.
Do you need more information about our compatible snow guards for Everlast Roofing standing-seam roof panels? Check out our full blog here: Snow Guards for Standing Seam Metal Roof Panels by Everlast Roofing.
| Everloc Profile | Everseam Profile | |
|---|---|---|
 IceJax I |
YES | YES |
 IceJax II |
YES | YES |
 EcoJax |
YES | YES |
 SnoBlox Deuce |
YES | YES |
 SnoBlox Ace |
YES | YES |
 SnoJax II |
YES | YES |
 SnowBreaker |
YES | YES |
 SnoBar Standing Seam |
YES | YES |
 ColorBar Standing Seam |
YES | YES |
 SnoBar RCB-3 |
YES | YES |
 ColorBar RCB-3 |
YES | YES |
 2 Bar SnoBar |
YES | YES |
 2 Bar ColorBar |
YES | YES |
 SnoCleat RC |
YES | YES |
 SnoCleat RCT |
YES | YES |
Everloc and Everseam profiles offer broad standing-seam compatibility because they accept many adhesive-mounted guards and compatible clamp-on snow-retention systems.
Striated panels may require a heavier adhesive application to fill small gaps and reduce moisture paths beneath the guard. If using a rail system, IceStopper attachments can help manage snow and ice beneath the rail above pedestrian or parking areas.
Snow Guards for Everlast Roofing Exposed Fastener Roof Panels
Everlast Roofing's exposed-fastener compatibility in this guide includes PBR, Everlast II, EverDrain, and Twin Rib profiles. These panels vary by rib spacing, rib height, panel width, and available low-flat mounting area, so each profile requires a separate compatibility check before ordering snow guards or rail systems.
Exposed fastener reminder: When screw-down snow guards or rails show compatibility, installers should attach them through the low flats of the panel and into adequate structure. Do not install individual snow guards or rail systems directly on the high ribs of the panel.
Do you need more information about our compatible snow guards for Everlast Roofing exposed-fastener roof panels? Check out our full blog here: Snow Guards for Exposed Fastener Metal Roof Panels by Everlast Roofing.
| PBR Profile | Everlast II Profile | EverDrain Profile | Twin Rib Profile | |
|---|---|---|---|---|
| IceJax I |
YES | YES | NO | YES |
| IceJax II |
YES | NO | NO | NO |
| EcoJax |
YES | YES | NO | YES |
| SnoBlox Deuce |
YES | YES | NO | YES |
| SnoBlox Ace |
YES | NO | NO | NO |
 SnoJax I |
YES | YES | NO | NO |
| SnoJax II |
YES | NO | NO | NO |
| SnowBreaker |
YES | YES | NO | YES |
 SnowCatcher |
YES | YES | NO | NO |
 SnoCleat PBR |
YES | YES | NO | YES |
 SnoCleat 2.67 |
NO | NO | NO | NO |
 SnoBar PBR |
YES | YES | NO | YES |
 ColorBar PBR |
YES | YES | NO | YES |
 SnoBar 2.67 |
NO | NO | NO | NO |
 ColorBar 2.67 |
NO | NO | NO | NO |
Everlast Roofing PBR panels are compatible with many pad-style polycarbonate guards, including EcoJax, SnoBlox Deuce, SnowCatcher, SnoCleat PBR, SnoBar PBR, and ColorBar PBR.
Everlast II panels work with a narrower group of compatible products, including IceJax I, EcoJax, SnoBlox Deuce, SnoJax I, SnowBreaker, SnowCatcher, SnoCleat PBR, SnoBar PBR, and ColorBar PBR.
EverDrain panels do not show current SnoBlox-Snojax compatibility because the available profile information indicates narrow flat areas that do not fit the current product line.
Twin Rib panels show compatibility with IceJax I, EcoJax, SnoBlox Deuce, SnowBreaker, SnoCleat PBR, SnoBar PBR, and ColorBar PBR. Verify the flat area dimensions with Everlast Roofing before ordering, as the blog notes limited information on available flat widths.
For screw-down installations, fasteners must engage a suitable structure beneath the roof panel. For adhesive-mounted polycarbonate guards, plan installation around SureBond SB-190 cure requirements and avoid copper roofing applications.
Everlast Roofing Snow Guard Buying Checklist
- Confirm the exact name of the Everlast Roofing panel before choosing any product.
- Identify the roof type: standing seam, concealed fastener, exposed fastener, PBR-style, or corrugated.
- Verify the attachment method: adhesive, screw-down, clamp-on, PBR bracket, or 2.67 corrugated bracket.
- Check ground snow load. Individual glue-down or screw-down guards generally work best for lighter snow-load applications. Higher loads often require rail systems.
- Request a layout rather than installing only in isolated areas such as doors, chimneys, or HVAC equipment.
- Order samples or single units when a test fit is needed. SnoBlox-Snojax products and components are available with no minimum order requirement.
Related Resources
Need Help Identifying Your Everlast Roofing Panel?
If you are not sure which Everlast Roofing panel you have, carefully compare the panel profile, review the two detailed Everlast Roofing blog posts linked above, and order a single test-fit unit before committing to a full project. For project-specific help, contact SnoBlox-Snojax at support@snojax.com or call 1-800-766-5291.
Do you have a metal roof from a different manufacturer?
Visit our "Snow Guard Compatibility by Roof Manufacturer" resource page for detailed information on which snow guards and snow retention systems are compatible with your metal roof.
Compatibility Guidance Note
SnoBlox-Snojax bases the compatibility information presented in this guide on product testing and field experience with Everlast Roofing metal roof panel profiles. Panel manufacturers periodically update profile specifications, and individual project variables, such as seam condition, coating type, and installation method, can affect outcomes. Customers are encouraged to confirm current panel specifications directly with Everlast Roofing and to contact SnoBlox-Snojax with project-specific questions before ordering.