null Skip to main content

Economical 6 Foot SnoBar and ColorBar Snow Rail Kits

See Now

Snow Guards for Lifetime Metal Sales

Snow guards for Lifetime Metal Sales roofing panels help manage rooftop snow and ice before it suddenly releases above entrances, sidewalks, parking areas, equipment, landscaping, loading zones, and other vulnerable locations. The correct SnoBlox-Snojax solution depends first on whether the Lifetime Metal Sales roof uses a standing-seam concealed-fastener panel or an exposed-fastener profile, and then on the exact panel installed.

Compatible Lifetime Metal Sales snow retention options may include adhesive-mounted polycarbonate guards, screw-fastened guards, standard SnowCatcher products, PBR-style rail systems, non-penetrating clamp-on rails, RCB-3 assemblies, 2-bar rail systems, and clamp-on or PBR SnoCleat products, depending on the panel profile.
  • Lifetime Metal Sales standing-seam and exposed-fastener roofs require different attachment methods.
  • Standing-seam panels should use compatible clamp-on systems or adhesive-mounted guards rather than fasteners that penetrate the panels.
  • Exposed-fastener panels may accept adhesive-mounted guards, screw-down products, standard SnowCatcher guards, PBR rails, or SnoCleat PBR systems when the profile provides suitable mounting space.
  • The EnduraLoc 1.0/1.5 standing-seam panel supports a broad mix of adhesive and non-penetrating clamp-on solutions.
  • Final selection should consider panel geometry, roof slope, panel width, run length, snow load, roof material, striations, and the required full-roof layout.
Important: Do not select snow guards by appearance alone. A product that fits one Lifetime Metal Sales panel may not fit another. Clamp-on products are intended only for compatible standing-seam profiles. At the same time, exposed-fastener panels may require adhesive bonding, low-flat mechanical fastening, PBR brackets, or another profile-specific method. Choosing the wrong system can reduce holding power, create leak risks, or lead to early failure.

⚡ Lifetime Metal Sales Primary Quick Selection Guide

Use this section for fast profile-level guidance. Confirm the exact fit in the complete compatibility charts below.

  • EnduraLoc 1.0/1.5 standing-seam panels: Compatible with adhesive-mounted polycarbonate guards, SnoBar/ColorBar standing-seam rails, RCB-3 systems, 2-bar rails, and SnoCleat RC/RCT.
  • SR36 exposed-fastener panels: Compatible with selected polycarbonate guards, SnowBreaker, standard SnowCatcher, SnoCleat PBR, SnoBar PBR, and ColorBar PBR, but not every larger pad-style model.
  • ER36 and CR36 exposed-fastener panels: Compatible with the broader group of individual polycarbonate guards, standard SnowCatcher, SnoCleat PBR, SnoBar PBR, and ColorBar PBR.
  • Standing-seam warning: Never install screw-down snow guards through concealed-fastener standing-seam panels.

About Lifetime Metal Sales Roofing Systems

Lifetime Metal Sales began in 2006 under the name Luthy Metal Sales and manufactures metal roofing and siding for contractors and property owners. Its product line includes the EnduraLoc 1.0/1.5 concealed-fastener standing-seam panel along with the SR36, ER36, and CR36 exposed-fastener profiles. Because these panels use different rib patterns and fastening methods, snow guard compatibility must match the specific Lifetime Metal Sales panel on the roof.

Snow Retention Solutions for Lifetime Metal Sales Roofing

Lifetime Metal Sales standing-seam and exposed-fastener panels cannot use the same attachment approach. The EnduraLoc 1.0/1.5 typically accepts compatible non-penetrating clamp-on systems and adhesive-mounted polycarbonate guards. The SR36, ER36, and CR36 panels may accept screw-down products when installers fasten through the low flats into adequate structure, as well as compatible adhesive-mounted options.

Explore our complete selection of snow guards for metal roofs and use the two charts below to verify which SnoBlox-Snojax products fit each Lifetime Metal Sales profile. “YES” means the product appears as compatible with that panel. “NO” means the source compatibility chart does not list it as a fit.

Snow Guards for Lifetime Metal Sales Standing Seam Roof Panels

The Lifetime Metal Sales EnduraLoc 1.0/1.5 uses concealed fasteners and features 1-1/2-inch ribs spaced 16 inches apart. Its panel pan can support adhesive-mounted polycarbonate guards. At the same time, its seam geometry may also accept compatible clamp-on rail and cleat systems after a test fit confirms proper clamp engagement.

Standing seam warning: Do not drive screw-down snow guards through the EnduraLoc 1.0/1.5. Use adhesive-mounted guards where the panel provides a suitable bonding surface or non-penetrating clamp-on products that fit the seam correctly.

Do you need more information about compatible snow guards for Lifetime Metal Sales standing-seam roof panels? Read our complete blog here: Snow Guards for Standing Seam Metal Roof Panels by Lifetime Metal Sales.

The EnduraLoc 1.0/1.5 supports many adhesive-mounted polycarbonate guards and several non-penetrating clamp-on snow retention systems.

Apply enough adhesive to bridge minor panel texture and limit moisture channels beneath polycarbonate guards. For rail systems above pedestrian or parking areas, consider IceStopper attachments to help control snow and ice below the rail.

Snow Guards for Lifetime Metal Sales Exposed Fastener Roof Panels

This guide covers the Lifetime Metal Sales SR36, ER36, and CR36 exposed-fastener profiles. The SR36 uses 3/4-inch ribs spaced 9 inches on center, while the ER36 and CR36 use 36-inch coverage with major ribs at 12-inch intervals. Their low flat areas and rib spacing allow several individual snow guard and PBR rail options when installers use the proper location and attachment method.

Exposed fastener reminder: When using compatible screw-down guards or rails, fasten through the panel’s low flats and into sufficient structure. Never attach individual guards or rail brackets directly to the high ribs.

Do you need more information about compatible snow guards for Lifetime Metal Sales exposed-fastener roof panels? Read our complete blog here: Snow Guards for Exposed Fastener Metal Roof Panels by Lifetime Metal Sales.

  SR36 Profile ER36 Profile CR36 Profile
IceJax I
IceJax I 		YES YES YES
IceJax II
IceJax II 		NO YES YES
EcoJax
EcoJax 		YES YES YES
SnoBlox Deuce
SnoBlox Deuce 		YES YES YES
SnoBlox Ace
SnoBlox Ace 		NO YES YES
SnoJax I
SnoJax I 		YES YES YES
SnoJax II
SnoJax II 		NO YES YES
SnowBreaker
SnowBreaker 		YES YES YES
SnowCatcher
SnowCatcher 		YES YES YES
SnoCleat PBR
SnoCleat PBR 		YES YES YES
SnoCleat 2.67
SnoCleat 2.67 		NO NO NO
SnoBar PBR
SnoBar PBR 		YES YES YES
ColorBar PBR
ColorBar PBR 		YES YES YES
SnoBar 2.67
SnoBar 2.67 		NO NO NO
ColorBar 2.67
ColorBar 2.67 		NO NO NO

All three exposed-fastener profiles accept IceJax I, EcoJax, SnoBlox Deuce, SnoJax I, SnowBreaker, standard SnowCatcher, SnoCleat PBR, SnoBar PBR, and ColorBar PBR.

The SR36 does not provide the same fit for IceJax II, SnoBlox Ace, or SnoJax II that the ER36 and CR36 profiles provide. SnoCleat 2.67, SnoBar 2.67, and ColorBar 2.67 do not fit these panels because those systems require a 2.67-inch corrugated geometry.

For mechanical installations, fasteners must engage adequate structure below the panel. For adhesive-mounted polycarbonate guards, follow SureBond SB-190 temperature and cure requirements and do not use the adhesive on copper roofing.

Lifetime Metal Sales Snow Guard Buying Checklist

  • Confirm the exact Lifetime Metal Sales panel name before selecting a product.
  • Identify the roof type: standing seam, concealed fastener, exposed fastener, PBR-style, or corrugated.
  • Verify the attachment method: adhesive, screw-down, clamp-on, PBR bracket, or 2.67 corrugated bracket.
  • Check ground snow load. Individual glue-down or screw-down guards generally work best under lighter snow loads. In comparison, higher loads often call for rail systems.
  • Request a layout that includes snow retention in isolated areas such as above doors, chimneys, walkways, or HVAC equipment.
  • Order samples or single units when you need to confirm a test fit. SnoBlox-Snojax products and components have no minimum order requirement.

Need Help Identifying Your Lifetime Metal Sales Panel?

If you are not sure which Lifetime Metal Sales panel you have, carefully compare the panel profile, review the two detailed Lifetime Metal Sales blog posts linked above, and order a single test-fit unit before committing to a full project. For project-specific help, contact SnoBlox-Snojax at support@snojax.com or call 1-800-766-5291.

Do you have a metal roof from a different manufacturer?

Visit our "Snow Guard Compatibility by Roof Manufacturer" resource page for detailed information on which snow guards and snow retention systems are compatible with your metal roof.

Compatibility Guidance Note

SnoBlox-Snojax bases the compatibility information presented in this guide on product testing and field experience with Lifetime Metal Sales metal roof panel profiles. Panel manufacturers periodically update profile specifications, and individual project variables, such as seam condition, coating type, and installation method, can affect outcomes. Customers are encouraged to confirm current panel specifications directly with Lifetime Metal Sales and to contact SnoBlox-Snojax with project-specific questions before ordering.

Snow Guards for Lifetime Metal Sales Steel Roofing Panels – Compatibility & Installation FAQ

The correct snow guard depends on the specific Lifetime Metal Sales roof panel. SL1.0 standing seam panels typically work with compatible adhesive-mounted polycarbonate snow guards and non-penetrating clamp-on rail systems. SR36, ER36, and CR36 exposed fastener panels support different combinations of adhesive-mounted guards, screw-down snow guards, SnowCatcher products, SnoCleat systems, and PBR-style rail systems.
Yes, but only if the seam profile is compatible. Clamp-on systems should never be forced onto an incompatible seam. We recommend confirming the panel profile and performing a test fit before purchasing a complete system.
No. Screw-down snow guards should not penetrate concealed-fastener standing-seam panels. Use compatible clamp-on systems or adhesive-mounted polycarbonate snow guards instead.
Depending on the panel profile, compatible adhesive-mounted options may include EcoJax, SnoBlox Deuce, SnoBlox Ace, IceJax I, IceJax II, SnoJax I, SnoJax II, and SnowBreaker. Always verify compatibility with your specific panel before ordering.
Although all three are exposed fastener panels, they have different rib configurations and mounting surfaces. Because of these differences, some snow guards that fit the ER36 and CR36 panels are not recommended for the SR36 profile.
No. Snow guards should not be installed only in isolated areas. Proper spacing and row placement across the roof distribute snow loads more effectively and provide better long-term performance.
Yes. Individual snow guards often work well in lighter-snowload regions. In contrast, higher snow loads frequently require a rail-style snow retention system. Roof slope, roof length, ground snow load, and building use should all be considered when selecting a system.
Compare your roof panel with the profile drawings and photographs in our Lifetime Metal Sales compatibility guides. If you are still unsure, contact us with measurements and photos or order a sample to verify compatibility before placing a larger order.
Yes. We offer individual snow guards and sample components with no minimum order requirement, allowing you to verify compatibility before purchasing a complete snow retention system.

!