null Skip to main content

Snow Guards for Premier Metals

Snow guards for Premier Metals roofing panels help control sliding snow and ice, reducing the risk of damage to entrances, walkways, parking areas, equipment, and landscaping.

Compatible Premier Metals snow retention options include adhesive-mounted polycarbonate guards, compatible clamp-on systems for standing seam roofs, and profile-specific screw-down guards and rails for exposed fastener roofs.
  • Premier Loc and 2 Inch Commercial standing seam panels accept suitable adhesive-mounted guards and non-penetrating clamp-on systems.
  • Premier Rib, Legacy Rib, and Regent Rib require product selection around their flat mounting areas and rib spacing.
  • 3/4 Inch Corrugated requires compatible corrugated brackets and products.
  • Confirm roof slope, snow load, panel finish, structural attachment, and a full-roof layout before ordering.
Important: Match the snow retention system to the actual roof profile. Never screw snow guards through standing seam panels. Exposed-fastener and corrugated roofs require different mounting details; choosing the wrong product can compromise attachment strength or weatherproofing.

⚡ Premier Metals Quick Selection Guide

Identify your Premier Metals roof panel below, then review the corresponding compatibility chart to find suitable snow retention products.

  • Premier Loc and 2 Inch Commercial: Adhesive-mounted polycarbonate guards, SnoBar/ColorBar standing seam rails, RCB-3 and 2-bar systems, and SnoCleat RC/RCT. Test-fit clamps before a full order.
  • Premier Rib: Narrow guards, IceJax I, screw-mounted SnoJax I, SnowCatcher, SnoCleat PBR, and PBR rail systems.
  • Legacy Rib and Regent Rib: A broader selection of pad guards and PBR rails; check individual chart cells and mounting locations.
  • 3/4 Inch Corrugated: SnoCleat 2.67, SnoBar 2.67, and ColorBar 2.67 with suitable corrugated brackets.

About Premier Metals Roofing Systems

Premier Metals supplies metal roofing and siding for residential, agricultural, and commercial buildings. Its panel lineup includes concealed-fastener standing seam roofs and several exposed-fastener profiles. Profile names and rib geometry provide the starting point for selecting snow retention.

Snow Retention Solutions for Premier Metals Roofing

Use compatible clamps or adhesive-mounted guards on standing seam roofs. Exposed fastener panels may accept mechanically attached products when the specified fasteners engage suitable structure. Polycarbonate options include EcoJax, SnoBlox Deuce, IceJax, SnoJax, and SnowBreaker models, subject to the chart and each product’s instructions.

Browse snow guards for metal roofs and compare the profiles below. YES identifies a listed profile fit, subject to installation requirements; NO identifies a product not listed for that profile. SnowBreaker breaks apart sliding snow and ice rather than holding the snowpack in place.

Snow Guards for Premier Metals Standing Seam Roof Panels

Premier Loc and 2 Inch Commercial use different seam configurations. Both support the adhesive and clamp-on product options shown below. Confirm the actual seam and test-fit the selected clamp before ordering.

Standing seam warning: Do not use screw-down attachment through concealed fastener standing seam panels. Adhesive-mounted guards require a suitable bonding area and compatible finish.

Review panel descriptions, photographs, and installation considerations in Snow Guards for Premier Metals Standing Seam Metal Roof Panels.

Use SB-190 only as directed for compatible polycarbonate guards. Allow approximately 28 days for SB-190 adhesive to cure at temperatures of 50°F or warmer, following the manufacturer's installation instructions.

Striations may require additional adhesive to fill the bonding area. Do not bond these guards directly to copper.

Confirm clamp fit, rail configuration, and IceStopper placement for the project. Curved panels require separate review because pad-style guards need an appropriate mounting surface.

Snow Guards for Premier Metals Exposed Fastener Roof Panels

Premier Rib, Legacy Rib, 3/4 Inch Corrugated, and Regent Rib have different rib shapes and mounting areas. Use the individual columns to choose products for the installed profile.

See profile images, dimensions, and product placement guidance in Snow Guards for Premier Metals Exposed Fastener Metal Roof Panels.

Product Premier Rib Legacy Rib 3/4 Inch Corrugated Regent Rib (R-Panel)
IceJax I
IceJax I		 YES YES NO YES
IceJax II
IceJax II		 NO YES NO YES
EcoJax
EcoJax		 YES YES NO YES
SnoBlox Deuce
SnoBlox Deuce		 YES YES NO YES
SnoBlox Ace
SnoBlox Ace		 NO YES NO YES
SnoJax I
SnoJax I		 YES YES NO YES
SnoJax II
SnoJax II		 NO YES NO YES
SnowBreaker
SnowBreaker		 YES YES NO YES
SnowCatcher
SnowCatcher		 YES YES NO YES
SnoCleat PBR
SnoCleat PBR		 YES YES NO YES
SnoCleat 2.67
SnoCleat 2.67		 NO YES YES NO
SnoBar PBR
SnoBar PBR		 YES YES NO YES
ColorBar PBR
ColorBar PBR		 YES YES NO YES
SnoBar 2.67
SnoBar 2.67		 NO NO YES NO
ColorBar 2.67
ColorBar 2.67		 NO NO YES NO

EcoJax and SnoBlox Deuce are polycarbonate snow guards. Position compact guards between minor ribs where the product base fits. Premier Rib does not accept the wider IceJax II, SnoBlox Ace, or SnoJax II models shown in this guide.

On Legacy Rib, account for striations when preparing adhesive coverage. On Regent Rib, IceJax II and SnoJax II require consistent off-center placement to accommodate minor ribs. SnoJax I requires mechanical fastening.

For Premier Rib, Legacy Rib, and Regent Rib, attach mechanically fastened guards and PBR brackets through the specified low flats and into suitable structural supports.

The corrugated profile uses dedicated 2.67 products and bracket mounting details. Confirm bracket seating and attachment before installation; standard pad guards do not fit this corrugated profile.

SnoCleat 2.67 is also listed as compatible with Legacy Rib panels. Confirm bracket fit and attachment requirements with SnoBlox-Snojax before ordering for this roof profile.

Premier Metals Snow Guard Buying Checklist

  • Confirm the panel: Match its name, rib spacing, seam, and mounting surface.
  • Select the attachment: Use adhesive, clamps, structural fasteners, or profile-specific brackets as appropriate.
  • Review project loads: Roof pitch, slope length, snow load, and panel material affect system choice and row spacing.
  • Request a full-roof layout: Avoid isolated installations above doors or equipment that concentrate loads.
  • Plan adhesive work: Allow SB-190 to cure for about 28 days at 50°F or warmer, and verify finish compatibility.
  • Test-fit components: Confirm clamps and brackets before a full order.

Need Help Identifying Your Premier Metals Panel?

If you are not sure which Premier Metals panel you have, carefully compare the panel profile, review the two detailed Premier Metals blog posts linked above, and order a single test-fit unit before committing to a full project. For project-specific help, contact SnoBlox-Snojax at support@snojax.com or call 1-800-766-5291.

Do you have a metal roof from a different manufacturer?

Visit our "Snow Guard Compatibility by Roof Manufacturer" resource page for detailed information on which snow guards and snow retention systems are compatible with your metal roof.

Compatibility Guidance Note

SnoBlox-Snojax bases the compatibility information presented in this guide on product testing and field experience with Premier Metals metal roof panel profiles. Panel manufacturers periodically update profile specifications, and individual project variables, such as seam condition, coating type, and installation method, can affect outcomes. Customers should confirm current panel specifications directly with Premier Metals and contact SnoBlox-Snojax with project-specific questions before ordering.

Snow Guards for Premier Metals Roofing Panels – Compatibility & Installation FAQ

Snow guard compatibility with Premier Metals roofing panels depends on the panel profile and attachment method. Premier Loc and 2 Inch Commercial standing seam panels accept compatible adhesive-mounted polycarbonate snow guards and non-penetrating clamp-on systems. Premier Rib, Legacy Rib, and Regent Rib support selected adhesive-mounted and mechanically fastened snow guards, while 3/4 Inch Corrugated panels require specialized corrugated snow retention systems.

No. Do not install screw-down snow guards through Premier Loc or 2 Inch Commercial standing seam panels. Use compatible non-penetrating clamps or adhesive-mounted polycarbonate guards where the panel surface and finish allow.
Premier Loc panels accept compatible adhesive-mounted polycarbonate guards, including EcoJax, SnoBlox Deuce, IceJax I, IceJax II, SnoBlox Ace, SnoJax II, and SnowBreaker. Clamp-on options include SnoCleat RC, SnoCleat RCT, and compatible SnoBar and ColorBar standing seam rail systems.
Yes. Compatible options include SnoCleat RC, SnoCleat RCT, and SnoBar and ColorBar standing seam systems, including RCB-3 and 2-bar configurations. Test-fit the selected clamp on the actual seam before placing a full order.
EcoJax polycarbonate snow guards fit Premier Loc, 2 Inch Commercial, Premier Rib, Legacy Rib, and Regent Rib panels when the mounting surface and installation requirements allow. EcoJax does not fit the 3/4-inch corrugated profile. Use adhesive attachment on standing seam panels.
Premier Rib accepts EcoJax, SnoBlox Deuce, IceJax I, SnowBreaker, mechanically attached SnoJax I, SnowCatcher, SnoCleat PBR, and compatible SnoBar PBR and ColorBar PBR systems. IceJax II, SnoBlox Ace, and SnoJax II do not fit this profile.
Match the guard base or bracket to the panel’s mounting area. Striations may require additional SB-190 adhesive to fill gaps beneath compatible polycarbonate guards. Mechanically attached guards and PBR brackets must fasten through the specified low flats into suitable structure.
Place compact guards between the minor ribs where their bases fit. IceJax II and SnoJax II require consistent off-center positioning to accommodate the panel geometry. Follow the product instructions and project layout, and attach screw-down products through the low flats into suitable structure.
Use compatible SnoCleat 2.67, SnoBar 2.67, or ColorBar 2.67 systems with the specified corrugated brackets. Standard pad-style guards do not fit this profile. Confirm bracket seating, fastener selection, and structural attachment before installation.

Allow approximately 28 days for SB-190 adhesive to cure at temperatures of 50°F or warmer. Plan installation early enough for the adhesive to fully cure before snow loads reach the guards. Follow the manufacturer's instructions for proper surface preparation, adhesive application, and curing conditions.

SnoBlox-Snojax does not recommend isolated installations above doors, walkways, or equipment. These installations can concentrate snow loads and overload the system. Request a full-roof layout that accounts for the roof slope, slope length, panel profile, and snow load.
Compare the roof’s seam shape, rib spacing, panel width, and profile with Premier Metals documentation and the linked panel guides. For help selecting snow retention, contact SnoBlox-Snojax at support@snojax.com or 1-800-766-5291. Test-fit the appropriate components before placing a full order.

!