null Skip to main content

Economical 6 Foot SnoBar and ColorBar Snow Rail Kits

See Now

Snow Guards for Schulte Building Systems SBS

Snow guards for Schulte Building Systems roofing panels help manage snow and ice movement above walkways, entrances, loading zones, parked vehicles, landscaping, equipment, and other areas where a sudden roof slide could create damage or safety hazards. Choosing the correct SnoBlox-Snojax solution starts with identifying whether the Schulte roof uses a standing-seam concealed-fastener system or an exposed-fastener panel, followed by confirmation of the exact panel profile.

Compatible Schulte Building Systems snow retention options may include adhesive-mounted polycarbonate guards, mechanically fastened guards, SnowCatcher products, PBR-style rails, non-penetrating clamp-on rail systems, RCB-3 assemblies, 2-bar rails, and clamp-on SnoCleat products, depending on the panel geometry.
  • Schulte Building Systems standing-seam and exposed-fastener panels require different attachment methods.
  • Compatible standing-seam panels should use clamp-on systems or adhesive-mounted guards rather than screw-down attachments through the roof panel.
  • Schulte PBR, PBU, and SBS-369 exposed-fastener profiles may accept adhesive, screw-down, PBR bracket, or rail-style products when panel geometry permits.
  • TS-324 and VS-216 standing-seam profiles support adhesive-mounted polycarbonate guards and compatible non-penetrating clamp-on systems.
  • Product selection must account for roof pitch, panel width, snow load, roof run, roofing material, surface striations, and a complete layout across the roof area.
Important: Do not select a snow guard based only on appearance. A system that fits one Schulte Building Systems panel may not fit another. Clamp-on products only work on compatible standing-seam profiles, while exposed-fastener panels may require adhesive bonding, mechanical fastening, PBR brackets, or another profile-specific method. Choosing the wrong attachment can reduce holding strength, increase leak potential, or lead to premature failure.

⚡ Schulte Building Systems Primary Quick Selection Guide

Use this summary for quick profile-level direction, then confirm each fit in the detailed compatibility charts.

  • TS-324 and VS-216 standing seam panels: Compatible with adhesive-mounted polycarbonate snow guards, SnoBar and ColorBar standing seam rails, RCB-3 systems, 2-bar rails, and SnoCleat RC/RCT.
  • PBR exposed-fastener panel: Offers broad compatibility with individual polycarbonate guards, SnowCatcher, SnoCleat PBR, SnoBar PBR, and ColorBar PBR.
  • PBU and SBS-369 panels: Require narrower products that fit their available flat mounting areas; consult the exposed-fastener chart for product-specific YES and NO results.
  • Standing seam warning: Never fasten screw-down snow guards through concealed-fastener standing-seam panels.

About Schulte Building Systems Roofing Systems

Schulte Building Systems manufactures custom-engineered metal building systems for commercial, industrial, agricultural, and other construction applications. The company operates manufacturing facilities in Texas and Alabama and offers both concealed-fastener standing-seam roof systems and exposed-fastener panel profiles. Because these systems use different rib shapes, seam designs, and attachment methods, snow guard compatibility must match the specific Schulte panel installed on the building.

Snow Retention Solutions for Schulte Building Systems Roofing

Schulte standing-seam and exposed-fastener roof panels cannot use the same snow-retention attachment approach. Standing-seam roofs generally require non-penetrating clamp-on systems when the seam profile accepts the necessary clamp, or adhesive-mounted guards when the panel pan provides enough bonding area. Exposed-fastener panels can accept selected screw-down products when installers fasten them through the low flats and into adequate structure.

Explore our complete selection of snow guards for metal roofs and use the charts to verify which SnoBlox-Snojax products match each Schulte Building Systems profile. A “YES” indicates compatibility shown in the source guide, while a “NO” means the product is not listed as a fit for that panel.

Snow Guards for Schulte Building Systems Standing Seam Roof Panels

This standing-seam guide covers Schulte Building Systems TS-324 and VS-216 roof panels. Although these profiles differ in panel width, seam height, material options, and seaming technology, both support the same group of adhesive-mounted polycarbonate snow guards and compatible clamp-on retention systems shown below.

Standing seam warning: Do not install screw-down snow guards through concealed-fastener standing-seam roof panels. Use a compatible clamp-on product where the seam accepts it, or choose an adhesive-mounted guard when the panel provides an appropriate flat bonding surface.

Do you need more information about compatible snow guards for Schulte Building Systems standing-seam roof panels? Read our complete guide: Snow Guards for Schulte Building Systems Standing Seam Metal Roof Panels.

The TS-324 and VS-216 profiles provide broad standing-seam compatibility because both accept adhesive-mounted polycarbonate guards and multiple compatible clamp-on snow retention systems.

Apply enough adhesive on striated surfaces to fill small gaps and limit moisture paths beneath each guard. For rail installations above pedestrian or parking areas, add IceStopper attachments when needed to help control snow and ice below the rail.

Snow Guards for Schulte Building Systems Exposed Fastener Roof Panels

This exposed-fastener guide covers the Schulte Building Systems PBR, PBU, and SBS-369 profiles. The PBR panel provides the broadest mounting area and product range. The shallower PBU and SBS-369 profiles have narrower flat sections and minor ribs that limit some larger pad-style guards, so the exact compatibility results differ by product.

Exposed fastener reminder: When a screw-down snow guard or rail system is compatible, fasten it through the panel’s low flat and into adequate structure. Never mount an individual guard or rail bracket directly on the high rib.

Do you need more information about compatible snow guards for Schulte Building Systems exposed-fastener roof panels? Read our complete guide: Snow Guards for Schulte Building Systems Exposed Fastener Metal Roof Panels.

  PBR Profile PBU Profile SBS-369 Profile
IceJax I
IceJax I		 YES YES YES
IceJax II
IceJax II		 YES NO NO
EcoJax
EcoJax		 YES YES YES
SnoBlox Deuce
SnoBlox Deuce		 YES YES YES
SnoBlox Ace
SnoBlox Ace		 YES YES NO
SnoJax I
SnoJax I		 YES NO YES
SnoJax II
SnoJax II		 YES NO NO
SnowBreaker
SnowBreaker		 YES YES YES
SnowCatcher
SnowCatcher		 YES NO YES
SnoCleat PBR
SnoCleat PBR		 YES YES YES
SnoCleat 2.67
SnoCleat 2.67		 NO NO NO
SnoBar PBR
SnoBar PBR		 YES YES YES
ColorBar PBR
ColorBar PBR		 YES YES YES
SnoBar 2.67
SnoBar 2.67		 NO NO NO
ColorBar 2.67
ColorBar 2.67		 NO NO NO

The Schulte PBR profile works with the widest selection of pad-style polycarbonate guards, SnowCatcher, SnoCleat PBR, SnoBar PBR, and ColorBar PBR. The PBU and SBS-369 panels require products that fit their narrower flat mounting areas.

SnoCleat 2.67, SnoBar 2.67, and ColorBar 2.67 do not fit these Schulte profiles because those systems require 2.67-inch corrugated panel geometry. For adhesive-mounted polycarbonate guards, follow SureBond SB-190 cure requirements and do not use the adhesive on copper roofing.

Schulte Building Systems Snow Guard Buying Checklist

  • Confirm the exact Schulte Building Systems panel name before selecting a product.
  • Identify the roof type: standing seam, concealed fastener, exposed fastener, PBR-style, or corrugated.
  • Verify the attachment method: adhesive, screw-down, clamp-on, PBR bracket, or 2.67 corrugated bracket.
  • Check ground snow load. Individual glue-down or screw-down guards usually work best in lighter snow-load regions, while heavier loads often call for rail systems.
  • Request a layout instead of protecting only isolated areas such as doorways, chimneys, or HVAC equipment.
  • Order samples or single units when you need to confirm a test fit. SnoBlox-Snojax products and components have no minimum-order requirement.

Need Help Identifying Your Schulte Building Systems Panel?

If you are not sure which Schulte Building Systems panel you have, carefully compare the panel profile, review the two detailed Schulte Building Systems blog posts linked above, and order a single test-fit unit before committing to a full project. For project-specific help, contact SnoBlox-Snojax at support@snojax.com or call 1-800-766-5291.

Do you have a metal roof from a different manufacturer?

Visit our "Snow Guard Compatibility by Roof Manufacturer" resource page for detailed information on which snow guards and snow retention systems are compatible with your metal roof.

Compatibility Guidance Note

SnoBlox-Snojax bases the compatibility information presented in this guide on product testing and field experience with Schulte Building Systems metal roof panel profiles. Panel manufacturers periodically update profile specifications, and individual project variables, such as seam condition, coating type, and installation method, can affect outcomes. Customers are encouraged to confirm current panel specifications directly with Schulte Building Systems and to contact SnoBlox-Snojax with project-specific questions before ordering.

A FAQ Page from the SEO Rich Snippets App

The correct snow guard depends on the specific Schulte Building Systems roof panel installed. Standing seam panels typically use adhesive-mounted polycarbonate snow guards or non-penetrating clamp-on systems. In contrast, exposed fastener panels may be compatible with adhesive-mounted, screw-down, SnowCatcher, SnoBar PBR, ColorBar PBR, or SnoCleat PBR systems depending on the panel profile.
Yes. Many Schulte Building Systems standing seam roof panels are compatible with non-penetrating clamp-on snow retention systems or adhesive-mounted polycarbonate snow guards, eliminating the need to drill through the roof panel.
No. Screw-fastened snow guards should not be installed through concealed-fastener standing seam roof panels. Use adhesive-mounted products or compatible clamp-on systems designed for the specific seam profile.
This compatibility guide covers the TS-324 and VS-216 standing seam roof panels.
This guide includes compatibility information for Schulte Building Systems PBR, PBU, and SBS-369 exposed fastener roof panels.
Yes, but only on compatible exposed fastener roof panels. SnowCatcher products are not intended for standing seam applications.
Yes. Several Schulte Building Systems roof panels are compatible with SnoBar and ColorBar snow rail systems. The appropriate rail system depends on the roof panel profile and attachment method.
Yes. Compatible standing seam profiles may accept SnoCleat RC or SnoCleat RCT clamp-on systems when the seam geometry matches the attachment requirements.
No. Compatibility varies by panel profile. Even roofs from the same manufacturer can require different snow retention systems based on seam style, rib spacing, panel geometry, and attachment method.
Yes. Many Schulte Building Systems panels are compatible with adhesive-mounted polycarbonate snow guards installed using SureBond SB-190 adhesive according to the manufacturer's installation instructions.
Yes. SureBond SB-190 adhesive requires adequate temperatures and cure time to achieve full bond strength. Installations should follow the adhesive manufacturer's recommendations.
No. Snow retention systems perform best when installed as part of a properly engineered roof layout. Installing guards only over isolated areas can overload individual products and reduce overall system performance.
Compare your roof panel with the profile photos and specifications in the Schulte Building Systems compatibility guides. If you are unsure, contact SnoBlox-Snojax for assistance or order a sample to verify fit before placing a larger order.
Contact SnoBlox-Snojax with your panel information, roof dimensions, and project details. Our technical support team can help identify your roof panel, recommend compatible products, and provide a snow guard layout for your project.

!