null Skip to main content

Economical 6 Foot SnoBar and ColorBar Snow Rail Kits

See Now

Snow Guards for Steel Tile

Snow guards for Steel Tile Co. roofing panels help manage sliding snow and ice above entrances, sidewalks, parking areas, landscaping, equipment, and other places where a rooftop release could create a hazard or cause damage. Selecting the proper SnoBlox-Snojax solution starts with identifying whether the Steel Tile Co. roof has a standing-seam concealed-fastener system or an exposed-fastener panel, followed by the exact panel profile.

Compatible Steel Tile Co. snow retention options may include adhesive-mounted polycarbonate snow guards, screw-fastened guards, standard SnowCatcher products, PBR-style rail systems, non-penetrating clamp-on rails, RCB-3 systems, 2-bar rails, and clamp-on SnoCleat products, depending on panel geometry.
  • Steel Tile Co. standing seam and exposed fastener panels require different attachment methods.
  • Standing seam panels should use compatible clamp-on systems or adhesive-mounted guards, not screw-down products.
  • Exposed fastener panels may accept adhesive-mounted guards, screw-down guards, standard SnowCatchers, PBR rails, or SnoCleat PBR systems when panel shape and mounting space allow.
  • Snap Seam, Mechanical Lock, and Nail Strip profiles offer broad compatibility with adhesive-mounted guards and non-penetrating clamp-on systems.
  • Final selection should consider panel profile, roof slope, run length, roof material, ground snow load, available mounting area, and full-roof layout requirements.
Important: Do not select a snow guard only by appearance. A product that fits one Steel Tile Co. panel may not work on another. Clamp-on systems belong only on compatible standing seams. At the same time, exposed fastener panels may require adhesive bonding, mechanical fastening, PBR brackets, or another profile-specific method. An incorrect match can reduce holding strength, create leak risks, or lead to premature failure.

⚡ Steel Tile Co. Primary Quick Selection Guide

Use this section for quick profile-level guidance. Confirm each product fits in the detailed compatibility charts below.

  • Snap Seam, Mechanical Lock, and Nail Strip panels: Compatible with adhesive-mounted polycarbonate guards, SnoBar/ColorBar standing seam rails, RCB-3 systems, 2-bar rails, and SnoCleat RC/RCT.
  • Muskoka and Summit panels: Compatible with selected adhesive-mounted and screw-down guards, standard SnowCatcher, SnoCleat PBR, SnoBar PBR, and ColorBar PBR.
  • Standing seam warning: Never fasten screw-down snow guards through concealed-fastener standing seam panels.

About Steel Tile Co. Roofing Systems

Steel Tile Co. is a family-owned Central Ontario metal roofing manufacturer serving residential, agricultural, commercial, and light-industrial projects. Its product range includes concealed-fastener standing seam panels and exposed-fastener roofing and siding profiles. Because the seam shape, rib spacing, panel width, and attachment method vary by product, snow guard compatibility must match the exact Steel Tile Co. panel installed.

Snow Retention Solutions for Steel Tile Co. Roofing

Steel Tile Co. standing seam and exposed fastener panels do not share one universal attachment method. Standing seam roofs generally use non-penetrating clamp-on systems when seam geometry permits or adhesive-mounted polycarbonate guards when the panel pan provides enough bonding space. Exposed fastener roofs may accept screw-down products when installers fasten through the low flats and into adequate structure.

Explore our complete selection of snow guards for metal roofs and use the charts below to identify products that fit each Steel Tile Co. panel. “YES” marks a compatible product for that profile. “NO” identifies a product that does not fit the profile shown.

Snow Guards for Steel Tile Co. Standing Seam Roof Panels

Steel Tile Co. standing seam profiles in this guide include Snap Seam, Mechanical Lock, and Nail Strip. All three use a 1.5-inch seam and offer compatible flat panel areas for adhesive-mounted polycarbonate snow guards. Their seam configurations also accept the clamp-on snow rails and SnoCleat products listed below, subject to a successful test fit.

Standing seam warning: Do not install screw-down snow guards through concealed-fastener standing seam roof panels. Use compatible clamp-on products where seam geometry permits, or adhesive-mounted guards where the panel offers a suitable flat bonding surface.

Do you need more information about compatible snow guards for Steel Tile Co. standing seam roof panels? Read our full blog: Snow Guards for Steel Tile Co. Standing Seam Metal Roof Panels.

Snap Seam, Mechanical Lock, and Nail Strip are broadly compatible with adhesive-mounted polycarbonate guards and compatible non-penetrating clamp-on snow retention systems.

Apply adhesive carefully to prevent moisture paths beneath a guard. For clamp-on rail systems, test-fit a clamp before ordering and consider IceStopper attachments above pedestrian or parking areas where snow and ice could pass below the rail.

Snow Guards for Steel Tile Co. Exposed Fastener Roof Panels

Steel Tile Co. exposed fastener compatibility in this guide covers the Muskoka and Summit profiles. Both panels have minor ribs and usable central flats that support selected pad-style snow guards and PBR snow retention systems. Muskoka uses 26-gauge steel with 3/4-inch major ribs spaced about 10 7/8 inches apart, while Summit uses 29-gauge steel and a distinct lapped profile.

Exposed fastener reminder: When screw-down guards or rails are compatible, fasten them through appropriate low-flat areas and into sufficient structure. Do not rely on the roof panel alone for holding strength or mount products directly on the high ribs.

Do you need more information about compatible snow guards for Steel Tile Co. exposed fastener roof panels? Read our full blog: Snow Guards for Steel Tile Co. Exposed Fastener Metal Roof Panels.

Muskoka and Summit work with Icejax I, Ecojax, SnoBlox Deuce, Snojax I, SnowBreaker, standard SnowCatcher, SnoCleat PBR, SnoBar PBR, and ColorBar PBR.

Icejax II, SnoBlox Ace, Snojax II, SnoCleat 2.67, SnoBar 2.67, and ColorBar 2.67 do not fit these profiles. The 2.67 systems require matching 2.67-inch corrugated panel geometry.

For screw-down installations, fasteners must engage suitable decking or purlins beneath the panel. Plan adhesive installations around SureBond SB-190 cure requirements and do not use these polycarbonate guards on copper roofing.

Steel Tile Co. Snow Guard Buying Checklist

  • Confirm the exact Steel Tile Co. panel name before selecting a product.
  • Identify the roof type: standing seam, concealed fastener, exposed fastener, PBR-style, or corrugated.
  • Verify the attachment method: adhesive, screw-down, clamp-on, PBR bracket, or 2.67 corrugated bracket.
  • Check ground snow load. Individual glue-down or screw-down guards generally suit lighter snow-load applications, while higher loads often require rail systems.
  • Request a layout instead of protecting only isolated locations such as entrances, chimneys, or rooftop equipment.
  • Order samples or single units when you need to confirm a test fit. SnoBlox-Snojax products and components have no minimum order requirement.

Need Help Identifying Your Steel Tile Co. Panel?

If you are not sure which Steel Tile Co. panel you have, carefully compare the panel profile, review the two detailed Steel Tile Co. blog posts linked above, and order a single test-fit unit before committing to a full project. For project-specific help, contact SnoBlox-Snojax at support@snojax.com or call 1-800-766-5291.

Do you have a metal roof from a different manufacturer?

Visit our "Snow Guard Compatibility by Roof Manufacturer" resource page for detailed information on which snow guards and snow retention systems are compatible with your metal roof.

Compatibility Guidance Note

SnoBlox-Snojax bases the compatibility information presented in this guide on product testing and field experience with Steel Tile Co. metal roof panel profiles. Panel manufacturers periodically update profile specifications, and individual project variables, such as seam condition, coating type, and installation method, can affect outcomes. Customers are encouraged to confirm current panel specifications directly with Steel Tile Co. and to contact SnoBlox-Snojax with project-specific questions before ordering.

Snow Guards for Steel Tile Co Metal Roofing Panels – Compatibility & Installation FAQ

Steel Tile Co. Snap Seam, Mechanical Lock, and Nail Strip panels work with compatible adhesive-mounted polycarbonate snow guards, including Icejax I, Icejax II, Ecojax, SnoBlox Deuce, SnoBlox Ace, Snojax II, and SnowBreaker. These profiles also accept compatible clamp-on SnoBar, ColorBar, RCB-3, 2-bar, SnoCleat RC, and SnoCleat RCT systems.
No. Do not drive fasteners through Steel Tile Co. Snap Seam, Mechanical Lock, or Nail Strip panels. Use compatible non-penetrating clamp-on systems or adhesive-mounted polycarbonate snow guards instead.
Steel Tile Co. Muskoka and Summit exposed fastener panels work with Icejax I, Ecojax, SnoBlox Deuce, Snojax I, SnowBreaker, standard SnowCatcher, SnoCleat PBR, SnoBar PBR, and ColorBar PBR systems.
Yes. Ecojax fits the same Steel Tile Co. panels as SnoBlox Deuce. This includes the Snap Seam, Mechanical Lock, Nail Strip, Muskoka, and Summit profiles.
No. SnoCleat 2.67, SnoBar 2.67, and ColorBar 2.67 require matching 2.67-inch corrugated panel geometry. They do not fit the Steel Tile Co. Muskoka or Summit profiles.
No. The Steel Tile Co. Muskoka and Summit profiles do not provide the proper mounting geometry for SnoBlox Ace, Icejax II, or Snojax II. Use one of the products marked compatible in the Steel Tile Co. exposed fastener chart.
Installers should place compatible screw-down guards or brackets in the appropriate low-flat areas of the panel and fasten them into sufficient structural material. Do not mount snow guards or rail brackets directly on high ribs or rely on the roof panel alone for holding strength.
Yes. Compatible Steel Tile Co. panels can accept adhesive-mounted polycarbonate snow guards when they provide enough flat mounting space. SureBond SB-190 requires approximately 28 days at 50°F or warmer to fully cure.
Yes. A properly designed layout distributes snow loads across the roof instead of concentrating force above a doorway, walkway, chimney, or other isolated area. The correct number of rows depends on factors such as roof slope, panel spacing, roof length, ground snow load, and the selected product.
Yes. Test-fit the proposed clamp on the actual standing seam before placing a complete order. Panel specifications, seam dimensions, coatings, installation conditions, and manufacturing changes can affect compatibility.
Compare the panel’s seam or rib shape, dimensions, width, and fastening method with the Snap Seam, Mechanical Lock, Nail Strip, Muskoka, and Summit profiles shown in the Steel Tile Co. compatibility guides. If you remain unsure, order a single product or clamp for a test fit or contact SnoBlox-Snojax for assistance.
Contact SnoBlox-Snojax at [support@snojax.com](mailto:support@snojax.com) or call 1-800-766-5291. Provide the panel name, roof dimensions, roof pitch, seam or rib spacing, roof material, project location, and photographs when available.

!