Snow Guards for Berridge Manufacturing Company

Snow guards for Berridge roofing panels help manage the release of snow and ice from rooftops over walkways, doorways, parking areas, loading zones, landscaping, equipment, and other areas where sliding snow can pose hazards or cause property damage. The correct SnoBlox-Snojax product depends on whether the Berridge roof uses a standing-seam concealed-fastener system or an exposed-fastener panel, and, in turn, on the exact Berridge panel profile installed on the project.

Compatible Berridge snow retention options may include adhesive-mounted polycarbonate guards, screw-fastened guards, SnowCatcher products, PBR-style rail systems, 2.67 corrugated rail systems, non-penetrating clamp-on rail assemblies, RCB-3 rail systems, 2-bar rail systems, and clamp-on SnoCleat products, depending on the panel geometry.

• Berridge standing-seam and exposed-fastener panels require different snow-retention attachment methods.
• Standing seam panels should use compatible clamp-on systems or adhesive-mounted guards, not screw-down attachments.
• Exposed-fastener panels may accept glue-down, screw-down, SnowCatcher, PBR rail, 2.67 rail, SnoCleat PBR, or SnoCleat 2.67 systems, depending on panel shape and available mounting area.
• Berridge Tee-Panel, High Seam Tee-Panel, Tee-Lock, Cee-Lock, Zee-Lock, Double-Lock Zee-Lock, and Batten Seam profiles each have different snow guard compatibility limits.
• Final product selection should account for roof slope, panel width, snow load, run length, roof material, panel striations, curvature, seam details, and full-roof layout requirements.

Important: Do not choose snow guards based only on how a product looks. A guard or rail system that works on one Berridge profile may not be appropriate for another. Clamp-on systems are intended only for compatible standing-seam profiles. In contrast, exposed-fastener panels may require adhesive bonding, mechanical fastening, PBR brackets, 2.67 corrugated brackets, or other panel-specific mounting methods. An incorrect selection can reduce holding strength, increase the risk of leaks, or cause premature system failure.

⚡ Berridge Primary Quick Selection Guide

Use this section for fast profile-level direction. Confirm the exact product fit in the full compatibility charts below.

• Tee-Panel, High Seam Tee-Panel, and Batten Seam panels: Compatible with selected adhesive-mounted polycarbonate snow guards, but not shown as compatible with clamp-on rail or SnoCleat systems because of the seam cap and/or Weatherseal details.
• Curved or tapered Tee-Panel and High Seam Tee-Panel profiles: Not recommended for pad-style snow guards because radiused panels do not provide the flat mounting surface required for proper installation.
• Tee-Lock and Cee-Lock panels: Compatible with adhesive-mounted guards and selected RCB-3, 2-bar, and SnoCleat RCT options when the seam configuration allows proper attachment.
• Zee-Lock and Double-Lock Zee-Lock panels: Show broad compatibility with standing seam systems, including adhesive-mounted guards, standing seam rails, RCB-3 systems, 2-bar rails, and SnoCleat options.
• Berridge exposed-fastener panels: Compatibility varies by R-Panel, Double-Rib, Deep-Deck, S-Deck, and M-Panel geometry.
• Standing seam warning: Do not fasten screw-down snow guards through concealed-fastener standing seam panels.

Do you need more information about our compatible snow guards for Berridge standing-seam roof panels? Check out our full blog here: Snow Guards for Standing Seam Metal Roof Panels by Berridge.

	Tee-Panel Profile	Curved or Tapered Tee-Panel Profile	High Seam Tee-Panel Profile	Curved or Tapered High Seam Tee-Panel Profile	Tee-Lock Panel Profile	Cee-Lock Panel Profile	Zee-Lock Panel Profile	Curved or Tapered Zee-Lock Panel Profile>	Double-Lock Zee-Lock Panel Profile	Batten Seam Panel Profile
IceJax I	YES	NO	YES	NO	YES	YES	YES	NO	YES	YES
IceJax II	YES	NO	YES	NO	YES	YES	YES	NO	YES	YES
EcoJax	YES	NO	YES	NO	YES	YES	YES	NO	YES	YES
SnoBlox Deuce	YES	NO	YES	NO	YES	YES	YES	NO	YES	YES
SnoBlox Ace	YES	NO	YES	NO	YES	YES	YES	NO	YES	YES
SnoJax II	YES	NO	YES	NO	YES	YES	YES	NO	YES	YES
SnowBreaker	YES	NO	YES	NO	YES	YES	YES	NO	YES	YES
SnoBar Standing Seam	NO	NO	NO	NO	NO	NO	YES	YES	YES	NO
ColorBar Standing Seam	NO	NO	NO	NO	NO	NO	YES	YES	YES	NO
SnoBar RCB-3	NO	NO	NO	NO	YES	YES	YES	YES	YES	NO
ColorBar RCB-3	NO	NO	NO	NO	YES	YES	YES	YES	YES	NO
2 Bar SnoBar	NO	NO	NO	NO	YES	YES	YES	YES	YES	NO
2 Bar ColorBar	NO	NO	NO	NO	YES	YES	YES	YES	YES	NO
SnoCleat RC	NO	NO	NO	NO	NO	NO	YES	YES	YES	NO
SnoCleat RCT	NO	NO	NO	NO	YES	YES	YES	YES	YES	NO

Berridge standing seam compatibility varies significantly by seam design. Tee-Panel, High Seam Tee-Panel, and Batten Seam profiles accept selected adhesive-mounted polycarbonate guards. In contrast, the Tee-Lock, Cee-Lock, Zee-Lock, Curved or Tapered Zee-Lock, and Double-Lock Zee-Lock profiles are compatible with selected clamp-on rail and SnoCleat systems.

EcoJax is listed directly above SnoBlox Deuce in the chart because it uses the same Berridge panel profiles as SnoBlox Deuce.

Curved or tapered panels require extra caution because pad-style snow guards need a flat mounting surface. Striated panels may require a heavier adhesive application to fill small gaps and reduce moisture paths beneath the guard. If using a rail system, IceStopper attachments are recommended above pedestrian or parking areas to help manage snow and ice beneath the rail.

Do you need more information about our compatible snow guards for Berridge exposed-fastener roof panels? Check out our full blog here: Snow Guards for Exposed Fastener Metal Roof Panels by Berridge.

	R-Panel Profile	Double-Rib Profile	Deep-Deck Profile	S-Deck Profile	M-Panel Profile
IceJax I	YES	YES	NO	NO	YES
IceJax II	YES	YES	NO	NO	NO
EcoJax	YES	YES	YES	NO	YES
SnoBlox Deuce	YES	YES	YES	NO	YES
SnoBlox Ace	YES	YES	NO	NO	YES
SnoJax I	YES	YES	NO	NO	NO
SnoJax II	YES	YES	NO	NO	NO
SnowBreaker	YES	YES	YES	NO	YES
SnowCatcher	YES	YES	NO	NO	NO
SnoCleat PBR	YES	YES	NO	NO	NO
SnoCleat 2.67	NO	YES	NO	YES	NO
SnoBar PBR	YES	YES	YES	NO	YES
ColorBar PBR	YES	YES	YES	NO	YES
SnoBar 2.67	NO	YES	NO	YES	NO
ColorBar 2.67	NO	YES	NO	YES	NO

Berridge R-Panel and Double-Rib profiles show the broadest exposed-fastener compatibility in this chart, including several pad-style polycarbonate guards, SnowCatcher, SnoCleat PBR, SnoBar PBR, and ColorBar PBR options.

S-Deck compatibility is limited to products designed for 2.67-style corrugated geometry, while Deep-Deck and M-Panel compatibility centers on selected polycarbonate guards and rail systems. For screw-down installations, fasteners must engage suitable structure beneath the roof panel. For adhesive-mounted polycarbonate guards, plan installation around SureBond SB-190 cure requirements and avoid copper roofing applications.

Berridge Snow Guard Buying Checklist

• Confirm the exact Berridge panel name before choosing any product.
• Identify the roof type: standing seam, concealed fastener, exposed fastener, PBR-style, or corrugated.
• Verify the attachment method: adhesive, screw-down, clamp-on, PBR bracket, or 2.67 corrugated bracket.
• Check ground snow load. Individual glue-down or screw-down guards are generally best suited for lighter snow-load applications. At the same time, higher loads often require rail systems.
• Request a layout rather than installing only in isolated areas such as doors, chimneys, or HVAC equipment.
• Order samples or single units when a test fit is needed. SnoBlox-Snojax products and components are available with no minimum order requirement.

Related Resources

• Snow Guards for Metal Roofs
• Snow Guards for Standing Seam Metal Roof Panels by Berridge
• Snow Guards for Exposed Fastener Metal Roof Panels by Berridge
• Snow Guard Compatibility by Roof Manufacturer
• Snow Guard Layout & Spacing Guide
• Snow Guards: What Works and What Does Not