Snow Guards for BORGA Steel Buildings and Components
Compatible Snow Guards for BORGA Steel Buildings Metal Panels
SnoBlox-Snojax offers snow guards compatible with BORGA Steel Buildings metal roof systems, including exposed fastener and standing seam profiles. Our pad-style and bar-style snow retention systems help prevent dangerous snow slides that can damage gutters, HVAC units, and property below. Each solution has been tested for performance and durability to meet the specific panel designs produced by BORGA Steel Buildings.
Use our Snow Guard Spacing Guide to determine proper placement and quantity for your project. For help selecting the correct guard for your BORGA Steel Buildings roof, contact our team or request a free quote.
Tip: Always install pad-style snow guards in multiple staggered rows across the entire roof to evenly distribute the snow loads. Space multiple rows of snow rails evenly as they go up the slope of the roof.
| Tioga Panel | Vertical Lock Panel | Pan-Deck Panel | |
|---|---|---|---|
 Ecojax |
YES | YES | YES |
 IceJax I |
YES | YES | YES |
 IceJax II |
YES | YES | YES |
 SnoBlox Deuce |
YES | YES | YES |
 Ace |
YES | YES | YES |
 Snojax II |
YES | YES | YES |
 SnowBreaker |
YES | YES | YES |
 SnoBar |
YES | YES | YES |
 ColorBar |
YES | YES | YES |
 SnoBar RCB-3 |
YES | YES | YES |
 ColorBar RCB-3 |
YES | YES | YES |
 2 Bar SnoBar |
YES | YES | YES |
 2 Bar ColorBar |
YES | YES | YES |
 SnoCleat RC |
YES | YES | YES |
 SnoCleat RCT |
YES | YES | YES |
| Super Panel | Classic Panel | Borga Panel | HR345 Panel | |
|---|---|---|---|---|
Ecojax |
YES | NO | YES | YES |
| IceJax I |
YES | NO | YES | NO |
| IceJax II |
YES | NO | NO | NO |
| SnoBlox Deuce |
YES | NO | YES | YES |
| Ace |
YES | NO | YES | NO |
 Snojax I |
YES | NO | NO | NO |
| Snojax II |
YES | NO | NO | NO |
| SnowBreaker |
YES | NO | YES | YES |
 SnowCatcher |
YES | NO | NO | NO |
 SnoBar PBR |
YES | NO | YES | YES |
 ColorBar PBR |
YES | NO | YES | YES |
 SnoCleat PBR |
YES | NO | NO | NO |
 SnoCleat 2.67 |
NO | YES | NO | NO |
 SnoBar 2.67 |
NO | YES | NO | NO |
 ColorBar 2.67 |
NO | YES | NO | NO |
Adhesive Mounted Snow Guards for BORGA Steel Buildings
Seam Mounted Snow Retention for BORGA Steel Buildings
Screw Down Snow Guards for BORGA Steel Buildings
Screw Down SnoBar and Snow Rails for BORGA Steel Buildings
Frequently Asked Questions
Most BORGA Steel Buildings exposed fastener panels like the Super Panel are compatible with our SnoBlox Deuce and IceJax I models. For standing seam profiles such as the Vertical Lock Panel, SnoBar® or ColorBar systems offer non-penetrating options that attach with seam clamps instead of screws. See the chart above.
Adhesive-mounted models, such as Ecojax, SnoBlox, IceBlox and Snojax II can be used on smooth-coated BORGA Steel Buildings metal panels provided that proper cleaning and cure times are observed, with temperatures above 50°F. Always follow the manufacturer's instructions for curing and temperature requirements of the adhesive.
Install snow guards across the entire roof surface, starting approximately 12–24 inches above the eave. On longer runs, avoid placing a single row of snow guards or snow rails only at the gutter edge. Multiple staggered rows of snow retention evenly placed on the roof provide balanced loading.
Screw-Down Snow Guards: Use #14 exterior-grade screws with neoprene washers positioned beneath each screw head. This type of snow guard screw ensures a watertight seal and long-term durability on metal roofing applications.
Clamp-Mounted Snow Retention Systems: Select a clamp-on snow guard or snow rail equipped with stainless steel cup-tipped set screws for secure attachment. This type of set screw prevents roof panel damage while delivering safe, maintenance-free snow retention performance across standing seam metal roofing profiles.