null Skip to main content

Economical 6 Foot SnoBar and ColorBar Snow Rail Kits

See Now

Snow Guards For Construction Metal Products (CMP)

Snow guards for Construction Metal Products (CMP) roofing panels help manage the sudden release of snow and ice from metal roofs above entrances, walkways, parking areas, landscaping, equipment, and other vulnerable spaces. The correct SnoBlox-Snojax product depends on whether the CMP roof uses a standing-seam concealed-fastener system or an exposed-fastener panel, and, in turn, on the exact CMP panel profile installed on the building.

Compatible Construction Metal Products (CMP) snow retention options may include adhesive-mounted polycarbonate guards, screw-fastened guards, SnowCatcher products, PBR-style rail systems, non-penetrating clamp-on rail assemblies, RCB-3 rail systems, 2-bar rail systems, and clamp-on SnoCleat products, depending on the panel geometry.
  • Construction Metal Products standing-seam and exposed-fastener panels require different snow-retention attachment methods.
  • Standing seam panels should use compatible clamp-on systems or adhesive-mounted guards, not screw-down attachments.
  • Exposed-fastener panels may accept glue-down, screw-down, SnowCatcher, PBR rail, SnoCleat PBR, or 2.67 corrugated systems, depending on panel shape and available mounting area.
  • CMP Series 2750, Series 2500, Series 2000, Series 1500, Series 1000, and Nail Strip profiles show broad compatibility with adhesive and clamp-on options.
  • Final product selection should account for roof slope, panel width, snow load, run length, roof material, panel striations, curved roof conditions, and full-roof layout requirements.
Important: Do not choose snow guards based only on how a product looks. A guard or rail system that works on one Construction Metal Products (CMP) profile may not be appropriate for another. Clamp-on systems are intended only for compatible standing-seam profiles. In contrast, exposed-fastener panels may require adhesive bonding, mechanical fastening, PBR brackets, 2.67 corrugated brackets, or other panel-specific mounting methods. An incorrect selection can reduce holding strength, increase the risk of leaks, or cause premature system failure.

⚡ Construction Metal Products (CMP) Primary Quick Selection Guide

Use this section for fast profile-level direction. Confirm the exact product fit in the full compatibility charts below.

  • Series 3000 panels: Compatible with adhesive-mounted polycarbonate guards, RCB-3 rail systems, 2-bar rails, and SnoCleat RCT.
  • Series 2750, 2500, 2000, 1500, 1000, and Nail Strip panels: Compatible with adhesive-mounted guards and broad clamp-on rail or SnoCleat options.
  • Curved standing-seam panels: Compatible rail options may be available, but pad-style guards are not recommended on curved surfaces because they require a flat bonding area.
  • Series R, Series 5V, and Multi-Rib exposed-fastener panels: Compatible with selected polycarbonate guards, SnowCatcher, SnoCleat, SnoBar, and ColorBar systems based on panel geometry.
  • Standing seam warning: Do not fasten screw-down snow guards through concealed-fastener standing seam panels.

About Construction Metal Products (CMP) Roofing Systems

Construction Metal Products, commonly known as CMP, manufactures metal roofing and wall systems for residential, commercial, industrial, and architectural projects. The company has operated since 1994 and serves customers across the Carolinas, Virginia, and Georgia. CMP offers both standing-seam concealed-fastener panels and exposed-fastener profiles, so snow guard compatibility must match the exact panel style on the roof.

Snow Retention Solutions for Construction Metal Products (CMP) Roofing

CMP standing-seam panels and exposed-fastener panels do not use the same snow-retention attachment method. Standing seam roofs typically require non-penetrating clamp-on systems when the seam geometry allows it, or adhesive-mounted guards when the panel pan provides a suitable bonding surface. Exposed-fastener panels may accept screw-down products when attached through the low flats and into adequate structure.

See our full range of snow guards for metal roofs and use the charts below to confirm which SnoBlox-Snojax products fit each Construction Metal Products (CMP) panel. “YES” indicates the product is shown as a fit for that panel. “NO” means it is not shown as compatible for that profile.

Snow Guards for Construction Metal Products (CMP) Standing Seam Roof Panels

Construction Metal Products (CMP) standing seam profiles in this guide include Series 3000, Series 2750, Series 2500, Series 2500 Curved, Series 2000, Series 1500, Series 1500 Curved, Series 1000, Tee Series, Curved Tee Series, and Series Nail Strip. These panels vary by seam height, seam style, width, material, curving capability, and surface configuration. Many of these profiles work with adhesive-mounted polycarbonate guards and compatible clamp-on snow retention systems.

Standing seam warning: Do not install screw-down snow guards through concealed-fastener standing-seam roof panels. Use compatible clamp-on products where the seam accepts them, or adhesive-mounted guards where a flat bonding surface is available.

Do you need more information about our compatible snow guards for Construction Metal Products (CMP) standing-seam roof panels? Check out our full blog here: Snow Guards for Standing Seam Metal Roof Panels by Construction Metal Products (CMP).

  Series 3000 Profile Series 2750 Profile Series 2500 Profile Series 2500 Curved Profile Series 2000 Profile Series 1500 Profile Series 1500 Curved Profile Series 1000 Profile Tee Series Profile Curved Tee Series Profile Series Nail Strip Profile
IceJax I
IceJax I 		YES YES YES NO YES YES NO YES YES NO YES
IceJax II
IceJax II 		YES YES YES NO YES YES NO YES YES NO YES
EcoJax
EcoJax 		YES YES YES NO YES YES NO YES YES NO YES
SnoBlox Deuce
SnoBlox Deuce 		YES YES YES NO YES YES NO YES YES NO YES
SnoBlox Ace
SnoBlox Ace 		YES YES YES NO YES YES NO YES YES NO YES
SnoJax II
SnoJax II 		YES YES YES NO YES YES NO YES YES NO YES
SnowBreaker
SnowBreaker 		YES YES YES NO YES YES NO YES YES NO YES
SnoBar Standing Seam
SnoBar Standing Seam 		NO YES YES YES YES YES YES YES NO NO NO
ColorBar Standing Seam
ColorBar Standing Seam 		NO YES YES YES YES YES YES YES NO NO NO
SnoBar RCB-3
SnoBar RCB-3 		YES YES YES YES YES YES YES YES NO NO NO
ColorBar RCB-3
ColorBar RCB-3 		YES YES YES YES YES YES YES YES NO NO NO
2 Bar SnoBar
2 Bar SnoBar 		YES YES YES YES YES YES YES YES NO NO NO
2 Bar ColorBar
2 Bar ColorBar 		YES YES YES YES YES YES YES YES NO NO NO
SnoCleat RC
SnoCleat RC 		NO YES YES YES YES YES YES YES NO NO NO
SnoCleat RCT
SnoCleat RCT 		YES YES YES YES YES YES YES YES NO NO NO

CMP Series 2750, Series 2500, Series 2000, Series 1500, Series 1000, and Series Nail Strip panels offer broad standing-seam compatibility because they accept many adhesive-mounted guards and compatible clamp-on snow-retention systems.

Striated panels may require a heavier adhesive application to fill small gaps and reduce moisture paths beneath the guard. If using a rail system, IceStopper attachments are recommended above pedestrian or parking areas to help manage snow and ice beneath the rail.

Curved panels need additional review because pad-style snow guards require flat mounting surfaces. When a clamp-on rail system is not suitable for a curved panel, consult CMP for project-specific snow retention guidance.

Snow Guards for Construction Metal Products (CMP) Exposed Fastener Roof Panels

Construction Metal Products (CMP) exposed-fastener compatibility in this guide includes the Series R, Series 5V, and Series Multi-Rib profiles. These panels use exposed fasteners and have different rib layouts, flat areas, rib heights, and mounting surfaces. Their panel geometry allows several individual snow guard and rail-style snow retention options when the system is attached correctly.

Exposed fastener reminder: When screw-down snow guards or rails are compatible, they should be attached through the low flats of the panel and into adequate structure. Do not install individual snow guards or rail systems directly on the high ribs of the panel.

Do you need more information about our compatible snow guards for Construction Metal Products (CMP) exposed-fastener roof panels? Check out our full blog here: Snow Guards for Exposed Fastener Metal Roof Panels by Construction Metal Products (CMP).

CMP Series R, Series 5V, and Series Multi-Rib panels are compatible with many pad-style polycarbonate guards, including EcoJax, SnoBlox Deuce, SnowCatcher, SnoCleat PBR, SnoBar PBR, and ColorBar PBR.

SnoCleat 2.67, SnoBar 2.67, and ColorBar 2.67 apply only where the panel geometry meets 2.67-inch corrugated requirements. The Series 5V profile is shown as compatible with these 2.67 systems, while Series R and Multi-Rib are not.

For screw-down installations, fasteners must engage suitable structure beneath the roof panel. For adhesive-mounted polycarbonate guards, plan installation around SureBond SB-190 cure requirements and avoid copper roofing applications.

Construction Metal Products (CMP) Snow Guard Buying Checklist

  • Confirm the exact Construction Metal Products (CMP) panel name before choosing any product.
  • Identify the roof type: standing seam, concealed fastener, exposed fastener, PBR-style, or corrugated.
  • Verify the attachment method: adhesive, screw-down, clamp-on, PBR bracket, or 2.67 corrugated bracket.
  • Check ground snow load. Individual glue-down or screw-down guards are generally best suited for lighter snow-load applications. At the same time, higher loads often require rail systems.
  • Request a layout rather than installing only in isolated areas such as doors, chimneys, or HVAC equipment.
  • Order samples or single units when a test fit is needed. SnoBlox-Snojax products and components are available with no minimum order requirement.

Need Help Identifying Your Construction Metal Products (CMP) Panel?

If you are not sure which Construction Metal Products (CMP) panel you have, carefully compare the panel profile, review the two detailed Construction Metal Products (CMP) blog posts linked above, and order a single test-fit unit before committing to a full project. For project-specific help, contact SnoBlox-Snojax at support@snojax.com or call 1-800-766-5291.

Do you have a metal roof from a different manufacturer?

Visit our "Snow Guard Compatibility by Roof Manufacturer" resource page for detailed information on which snow guards and snow retention systems are compatible with your metal roof.

Compatibility Guidance Note

SnoBlox-Snojax bases the compatibility information presented in this guide on product testing and field experience with Construction Metal Products (CMP) metal roof panel profiles. Panel manufacturers periodically update profile specifications, and individual project variables, such as seam condition, coating type, and installation method, can affect outcomes. Customers are encouraged to confirm current panel specifications directly with Construction Metal Products (CMP) and to contact SnoBlox-Snojax with project-specific questions before ordering.

Snow Guards for Construction Metal Products (CMP) Metal Roofing Panels – Compatibility & Installation FAQ

Compatible options may include adhesive-mounted polycarbonate snow guards, SnoBar and ColorBar standing-seam rail systems, RCB-3 systems, 2-bar rail systems, and SnoCleat RC or SnoCleat RCT products, depending on the specific CMP standing-seam profile.
No. Do not install screw-down snow guards through concealed-fastener standing seam panels. Standing seam panels should use compatible clamp-on snow retention systems or adhesive-mounted guards when the panel has a suitable bonding surface.
CMP exposed-fastener panels may be compatible with adhesive-mounted polycarbonate guards, screw-down guards, SnowCatcher, SnoCleat PBR, SnoBar PBR, and ColorBar PBR systems, depending on the panel profile and the available fastening area.
No. This CMP guide does not include SnowBreaker 3M or decorative SnowCatcher styles in the compatibility charts.
Only panels with true 2.67-inch corrugated geometry should use 2.67 corrugated systems. PBR-style or other exposed fastener panels should use compatible PBR-style or panel-specific products instead.
Confirm the exact CMP panel name, roof type, panel width, rib spacing, rib height, roof slope, roof length, roof material, snow load, and whether the project requires adhesive, screw-down, clamp-on, or rail-style snow retention.
Snow guards are usually most effective when designed as a complete system across the roof rather than placed only in isolated spots. A full layout helps distribute snow load more evenly and reduces the chance of overloading a small section.
Yes. If the panel profile is uncertain, ordering a sample or single unit for test fitting is recommended before purchasing the full snow retention system.
For project-specific help, contact SnoBlox-Snojax with the CMP panel name, roof photos, measurements, and snow load information so we can determine the correct snow guard or snow retention system before you order.

!