Snow Guards & Snow Retention for Garco Construction
Compatible Snow Guards for Garco Construction
SnoBlox-Snojax offers snow guards that are compatible with Garco Construction metal roof systems. Our pad-style and bar-style snow retention systems help prevent dangerous snow slides that can damage gutters, HVAC units, and property below. Our snow retention solutions are proven for durability and performance and are compatible with most Garco metal panel systems.
Use our Snow Guard Spacing Guide to determine proper placement and quantity for your project. For help selecting the correct guard for your Garco Construction metal roof, contact our team or request a free quote. Always check with the panel manufacturer to confirm the compatibility of our snow retention systems.
Tip: Always install pad-style snow guards in multiple staggered rows across the entire roof to evenly distribute the snow loads. Space multiple rows of snow rails evenly as they go up the slope of the roof.
| Double-Lok | SuperLok | BattenLok HS | Ultra-Dek | |
|---|---|---|---|---|
 Ecojax |
YES | YES | YES | YES |
 IceJax I |
YES | YES | YES | YES |
 IceJax II |
YES | YES | YES | YES |
 SnoBlox Deuce |
YES | YES | YES | YES |
 Ace |
YES | YES | YES | YES |
 Snojax II |
YES | YES | YES | YES |
 SnowBreaker |
YES | YES | YES | YES |
 SnoBar |
YES | YES | YES | YES |
 ColorBar |
YES | YES | YES | YES |
 SnoBar RCB-3 |
YES | YES | YES | YES |
 ColorBar RCB-3 |
YES | YES | YES | YES |
 2 Bar SnoBar |
YES | YES | YES | YES |
 2 Bar ColorBar |
YES | YES | YES | YES |
 SnoCleat RC |
YES | YES | YES | YES |
 SnoCleat RCT |
YES | YES | YES | YES |
| PBR Panel | |
|---|---|
| Ecojax |
YES |
| IceJax I |
YES |
| IceJax II |
YES |
| SnoBlox Deuce |
YES |
| Ace |
YES |
 Snojax I |
YES |
| Snojax II |
YES |
| SnowBreaker |
YES |
 SnowCatcher |
YES |
 SnoBar PBR |
YES |
 ColorBar PBR |
YES |
 SnoCleat PBR |
YES |
 SnoCleat 2.67 |
NO |
 SnoBar 2.67 |
NO |
 ColorBar 2.67 |
NO |
Adhesive Mounted Snow Guards for Garco Construction Panels
Seam Mounted Snow Retention for Garco SSR Metal Panels
Screw Down Snow Guards for Garco Exposed Fastener PBR Panel
Screw Down SnoBar and ColorBar for Garco Construction Panels
Frequently Asked Questions about Snow Guards for Garco Construction
Yes, any screw-down SnoBlox, Snojax, Icejax, SnowCatcher, SnoBar, and ColorBar products will fit the Garco PBR panel profile.
Adhesive-mounted guards are suitable for all standing seam Garco Construction panels such as the Double-Lok, Ultra-Dek, SuperLok and BattenLok HS panels that have flat surfaces at least 1.5 inches wide. Always follow our installation spacing guidelines and check with the panel manufacturer for warranty information.
The Garco Construction standing seam panel widths are 12 to 24 inches. Determining the appropriate spacing depends on the roof pitch, panel length, and the local snow load rating. Consult our SnoBar Spacing Page for standing seam panels.