Snow Guards & Snow Retention for Wagler Steel
Compatible Snow Guards for Wagler Steel Metal Roof Panels
SnoBlox-Snojax offers snow guards that are compatible with Wagler Steel metal roof systems. Our pad-style and bar-style snow retention systems help prevent dangerous snow slides that can damage gutters, HVAC units, and property below. Our snow retention solutions are proven through durability and performance and are compatible with most of Wagler Steel panel systems.
Use our Snow Guard Spacing Guide to determine proper placement and quantity for your project. For help selecting the correct guard for your Wagler Steel roof, contact our team or request a free quote. Always check with the panel manufacturer to confirm the compatibility of our snow retention systems.
Tip: Always install pad-style snow guards in multiple staggered rows across the entire roof to evenly distribute the snow loads. Space multiple rows of snow rails evenly as they go up the slope of the roof.
| Standing Seam Panel | |
|---|---|
 Ecojax |
YES |
 IceJax I |
YES |
 IceJax II |
YES |
 SnoBlox Deuce |
YES |
 Ace |
YES |
 Snojax II |
YES |
 SnowBreaker |
YES |
 SnoBar |
YES |
 ColorBar |
YES |
 SnoBar RCB-3 |
YES |
 ColorBar RCB-3 |
YES |
 2 Bar SnoBar |
YES |
 2 Bar ColorBar |
YES |
 SnoCleat RC |
YES |
 SnoCleat RCT |
YES |
| Wagler Panel | Paradise Panel | |
|---|---|---|
| Ecojax |
YES | YES |
| IceJax I |
YES | YES |
| IceJax II |
NO | YES |
| SnoBlox Deuce |
YES | YES |
| Ace |
NO | YES |
 Snojax I |
NO | YES |
| Snojax II |
NO | YES |
| SnowBreaker |
YES | YES |
 SnowCatcher |
YES | YES |
 SnoBar PBR |
YES | YES |
 ColorBar PBR |
YES | YES |
 SnoCleat PBR |
YES | YES |
 SnoCleat 2.67 |
NO | YES |
 SnoBar 2.67 |
NO | NO |
 ColorBar 2.67 |
NO | NO |
Adhesive Mounted Snow Guards for Wagler Steel Panels
Seam Mounted Snow Retention for Wagler Steel SSR Panels
Screw Down Snow Guards for Wagler Steel Metal Roofing
Screw Down Snow Bars and Snow Rails for Wagler Steel Roofing
Frequently Asked Questions about Snow Guards for Wagler Steel
Yes, many Wagler Steel panels are compatible with our clamp-on snow retention and adhesive-mounted snow guards. However, seam geometry and panel gauge vary by profile. Always verify compatibility using our panel fitment chart above.
Made to look like a standing-seam panel, the Paradise panel has 11-inch flats, so the choice is yours. Just about any of our pad-style snow guards can be used with screw-down or adhesive applications. Always confirm panel gauge and seam shape before ordering.
Adhesive-mounted guards may be suitable for some Wagler Steel roof panels with flat surfaces and proper surface prep. Always follow our installation spacing guidelines and check with the panel manufacturer for warranty information. Check to ensure you have the appropriate curing time and temperature that the SB-190 adhesive requires.
Screw-Down Snow Guards for Wagler Exposed Fastener Panels: For the Paradise and Wagler panels, use #14 exterior-grade screws with neoprene washers positioned beneath each screw head. This type of snow guard screw ensures a watertight seal and long-term durability on metal roofing applications.
Clamp-Mounted Snow Retention Systems for Wagler Steel Standing Seam Panels: Select a clamp-on snow guard or snow rail equipped with stainless steel cup-tipped set screws for secure attachment. This low-torque set screw prevents roof panel damage while delivering safe, maintenance-free snow retention across standing seam metal roofing profiles made on New Tech Machinery rollformers.
The Wagler standing seam panel has ribs spaced 16 inches apart. Determining the appropriate spacing depends on the roof pitch, panel length, and the local snow load rating. For spacing of snow rails on Wagler standing seam panels, see the SnoBar Spacing Page.