Snow Guards & Snow Retention for Green Tree Metals
Compatible Snow Guards for Green Tree Metals Steel Roof Panels
SnoBlox-Snojax offers snow guards compatible with Green Tree Metals steel roof systems, including exposed fastener and standing seam profiles. Our pad-style and bar-style snow retention systems help prevent dangerous snow slides that can damage gutters, HVAC units, and property below. Each solution has been tested for performance and durability to meet the specific panel designs produced by Green Tree Metals.
Use our Snow Guard Spacing Guide to determine proper placement and quantity for your project. For help selecting the correct guard for your Green Tree Metals metal roof, contact our team or request a free quote.
Tip: Always install pad-style snow guards in multiple staggered rows across the entire roof to evenly distribute the snow loads. Space multiple rows of snow rails evenly as they go up the slope of the roof.
| Hemlock Low Panel | Hemlock Medium Panel | Hemlock High Panel | Hemlock Pro Panel | |
|---|---|---|---|---|
 Ecojax |
YES | YES | YES | YES |
 IceJax I |
YES | YES | YES | YES |
 IceJax II |
YES | YES | YES | YES |
 SnoBlox Deuce |
YES | YES | YES | YES |
 Ace |
YES | YES | YES | YES |
 Snojax II |
YES | YES | YES | YES |
 SnowBreaker |
YES | YES | YES | YES |
 SnoBar |
NO | NO | YES | YES |
 ColorBar |
NO | NO | YES | YES |
 SnoBar RCB-3 |
NO | NO | YES | YES |
 ColorBar RCB-3 |
NO | NO | YES | YES |
 2 Bar SnoBar |
NO | NO | YES | YES |
 2 Bar ColorBar |
NO | NO | YES | YES |
 SnoCleat RC |
NO | NO | YES | YES |
 SnoCleat RCT |
NO | NO | YES | YES |
| Tuff Rib Panel | R Panel | 5V Crimp Panel | |
|---|---|---|---|
| Ecojax |
YES | YES | NO |
| IceJax I |
YES | YES | NO |
| IceJax II |
NO | YES | NO |
| SnoBlox Deuce |
YES | YES | YES |
| Ace |
NO | YES | YES |
 Snojax I |
NO | YES | YES |
| Snojax II |
NO | YES | YES |
| SnowBreaker |
YES | YES | YES |
 SnowCatcher |
YES | YES | YES |
 SnoBar PBR |
YES | YES | YES |
 ColorBar PBR |
YES | YES | YES |
 SnoCleat PBR |
YES | YES | YES |
 SnoCleat 2.67 |
NO | NO | YES |
 SnoBar 2.67 |
NO | NO | NO |
 ColorBar 2.67 |
NO | NO | NO |
Adhesive Mounted Snow Guards for Green Tree Metals
Seam Mounted Snow Retention for Green Tree Metals
Screw Down Snow Guards for Green Tree Metals Steel Panels
Screw Down Snow Bars and Snow Rails for Green Tree Metals
Frequently Asked Questions about Snow Guards for Green Tree Metals
Yes, many Green Tree Metals panels are compatible with our clamp-on snow retention and adhesive-mounted snow guards. However, seam geometry and panel gauge vary by profile. Always verify compatibility using our panel fitment chart above or purchase a test clamp.
For the Hemlock High Series with 1.75-in standing seams or Hemlock Pro Series, we recommend adhesive mounted SnoBlox-Snojax pad style guards or clamp on Snobar or ColorBar with set screws. Confirm panel gauge and seam shape before ordering.
Yes, it's always a good idea to confirm that your roof structure is suitable for snow retention. Seam geometry, panel gauge, and structural capacity can vary by manufacturer and building design. We recommend reviewing your snow guard spacing layout with the panel manufacturer or a qualified professional to ensure proper fit and performance.
Individual snow guards get spaced in staggered patterns across the entire roof. Snow rails deliver continuous protection across the whole roof, making them ideal for high-snow regions or areas where sliding snow could damage gutters, walkways, or property below. Designers often specify bar-style snow retention systems on commercial or steep-slope Green Tree Metals metal roofs in heavy-snow-load regions because they are stronger.
Adhesive-mounted guards may be suitable for some Green Tree Metals panels with flat surfaces and proper surface prep. Always follow our installation spacing guidelines and check with the panel manufacturer for warranty information.